Skip to main content

Home › Products › Staffa motors › Smart Motor

Staffa Smart Motor

Infinitely variable displacement, under control.

A Staffa HPC motor with closed-loop electronic displacement control, on the HPC200 and HPC325 frames. Supplied and supported from Silsden, West Yorkshire.

Get a priceSend us your model code
Staffa Smart Motor with electronic displacement control

2frames

Frame sizesHPC200 and HPC325.

5,326cc/rev

Largest displacementHPC325; the HPC200 reaches 3,087 cc/rev.

3modes

Control modesConstant torque, constant power or constant speed.

800h

Salt spray ratingZinc-nickel coated valve, to ISO 9227.

Overview

The Staffa Smart Motor: infinitely variable displacement

The Staffa Smart Motor is a Staffa HPC radial piston motor with closed-loop electronic displacement control. Its controller measures the actual displacement and adjusts a proportional valve, so the displacement can be set anywhere between maximum and minimum, under load and while rotating, motoring or pumping.

It runs in constant torque, constant power or constant speed, and senses speed, direction, absolute shaft position and displacement. Smart+ adds CANopen pressure transducers, so the motor reports live torque, power and mechanical efficiency and can act as a CANopen master or slave. KPM UK offers production and evaluation units.

We are a UK distributor for Kawasaki Precision Machinery, supplying Staffa motors and genuine KPM spares. The Smart Motor uses the HPC frames, so its pressure, speed and power ratings follow the HPC datasheet.

Smart or Smart+?

Two versions, one motor

  • Smart (HPCe): controller with analogue and digital I/O, encoders and proportional valve
  • Smart+ (HPCi): adds CANopen pressure transducers for live torque, power and efficiency
  • CANopen control is optional on Smart and standard on Smart+
  • Two fixed displacements are enough? The HPC or HMC

Key advantages

Why choose a Staffa Smart Motor

Any displacement, any time

Infinitely variable between maximum and minimum, changed under load and while rotating.

Control like an electric drive

Constant torque, constant power or constant speed, from a rugged hydraulic motor.

Knows where it is

Speed, direction, absolute shaft position and displacement sensing.

Live data

Torque, power and mechanical efficiency over CANopen on Smart+, with datalogging and USB live monitoring.

Configurable emergency response

Set how the motor responds when a fault or unsafe load is detected.

Built for the sea

A zinc-nickel coated valve rated 800 hours against ISO 9227 salt spray, and a mechanical freewheel option for anchor handling winches.

Technical data

Staffa Smart Motor specifications

Smart and Smart+ share the motor, the controller and the sensors; Smart+ adds the pressure transducers.

ItemSmart (HPCe)Smart+ (HPCi)
FramesHPC200 or HPC325HPC200 or HPC325
Max. displacement3,087 or 5,326 cc/rev3,087 or 5,326 cc/rev
Displacement controlClosed loop, infinitely variableClosed loop, infinitely variable
Control modesConstant torque, power or speedConstant torque, power or speed
InputsAnalogue preset (0 to 5 V, 0 to 10 V, 0 to 20 mA or 4 to 20 mA); digital I/OAnalogue, digital or CANopen
CANopenOptionalStandard; master or slave
SensingSpeed, direction, absolute shaft position, displacementAs Smart, plus port pressures for torque, power and efficiency
Controller supply24 V DC24 V DC
ConnectionsM12 8-pole and 5-pole; Deutsch DT04 valve connectorAs Smart
Hydraulic connectionSFM4 (1½” SAE code 62) or SM4 manifoldAs Smart

Pressure, speed and power ratings follow the HPC datasheet for the HPC200 and HPC325 frames. Source: KPM UK Smart / Smart+ datasheet (file M-200712.24-HPCe, December 2024).

Options

Options and configurations

The Smart Motor is built to order on the HPC200 or HPC325 frame.

Shafts

The HPC shaft range, including DIN 5480 and BS 3550 splines, taper and parallel keyed shafts.

Hydraulic connection

SFM4 SAE code 62 flange ports, or SM4 for a manifold.

Mechanical freewheel

Zero swept volume and zero torque when an unsafe load is met, for anchor handling winches.

HPC special features

The HPC options for seals, paint and performance apply.

Applications

Where Smart Motors work

Marine winches

Escort and towing winches, anchor handling, auto-tensioning

Offshore

Active heave compensation

Drilling and piling

Drilling and piling rigs

Test rigs

Dynamometers, such as a test rig at 20,400 Nm continuous

Want to see one working? KPM’s Smart Motor case history describes one in service.

Downloads

Staffa Smart Motor downloads

Current documents from Kawasaki Precision Machinery (UK). No forms, no sign-up.

Smart / Smart+ datasheet

M-200712.24-HPCe · December 2024 · PDF

Download

Smart Motor brochure

MYK6339 · PDF

Download

Smart Motor case history

PDF

Download

Staffa HPC datasheet

Performance for the HPC200 and HPC325 frames · PDF

Download

Talk it through

Not sure how it would fit your machine?

Tell us what the motor drives and how you want to control it, and we will talk you through the options.

Upgrading

Moving to a Smart Motor

The Smart Motor uses the HPC200 and HPC325 frames. If you already run one of those, or an HMC or HPC on a similar duty, send us the model code and the duty and we will look at the Smart route.

Production and evaluation units

KPM UK offers both, so a Smart Motor can be trialled on your machine.

What to send us

The model code of the motor you run now, what it drives, and how you want to control it: torque, power or speed.

Model code

How to read a Smart Motor model code

  1. Version: HPCe for Smart, HPCi for Smart+
  2. Frame size: 200 or 325
  3. Shaft: from the HPC shaft range
  4. High displacement: in cubic inches, in steps of 5
  5. Low displacement: in cubic inches, in steps of 5
  6. Hydraulic connection: SFM4 or SM4
  7. Design series: assigned by Kawasaki
  8. Special features: as listed in the HPC datasheet

Let’s talk Smart

Interested in a Smart Motor?

We just need three details.

Running an HPC already? Send us the model code and what the motor drives, and we will work from those.

1

Duty

What the motor drives, its torque and its speed.

2

Control

Constant torque, power or speed, and how you will command it.

3

Data

Whether you need live torque, power and efficiency (Smart+).

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Staffa Smart Motor questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

What is the difference between Smart and Smart+?

Both have the controller, encoders and proportional valve, with analogue and digital control. Smart+ adds two CANopen pressure transducers, so it calculates live torque, power and mechanical efficiency, detects motoring or pumping, and can act as a CANopen master or slave.

Can the displacement change under load?

Yes. It changes continuously under load and while the motor rotates, whether motoring or pumping.

Which frames are available?

The HPC200, up to 3,087 cc/rev, and the HPC325, up to 5,326 cc/rev.

How is it controlled?

By an analogue displacement preset (0 to 5 V, 0 to 10 V, 0 to 20 mA or 4 to 20 mA), digital I/O, or CANopen, with a 24 V DC controller supply.

Where is it used?

Escort, towing and anchor handling winches, auto-tensioning, drilling and piling, test rig dynamometers and active heave compensation.