Skip to main content

Home › Products › Staffa motors

Staffa Radial Piston Motors

High torque at low speed, from one displacement to infinitely variable.

Genuine Kawasaki Staffa motors from 188 to 8,000 cc/rev, with the Staffa brakes we make to fit them and genuine KPM spares. Supplied and supported from Silsden, West Yorkshire.

Get a priceSend us your model code

Staffa series

Choose a Staffa motor series

Seven series, each with its own page of specifications, options, datasheets and spares.

Staffa HMB radial piston motor

Fixed displacement

Staffa HMB

Rugged and proven, for one speed range.

Displacement188 to 8,000 cc/rev

  • Frames HMB030 to HMB500, with heavy duty HMHDB versions
  • Up to 25,250 Nm output torque
  • Up to 250 bar continuous and 190 kW
Staffa HPB radial piston motor

Fixed displacement, high power

Staffa HPB

More speed and power from one displacement.

Displacement983 to 5,310 cc/rev

  • Eight frames, HPB060 to HPB325
  • Output torque up to 23,000 Nm
  • Up to 215 kW continuous, 278 kW with crankcase flushing
Staffa HMC dual displacement motor

Dual displacement

Staffa HMC

Two displacements, changed on the run.

Largest displacement by frame492 to 5,326 cc/rev

  • Seven frames, HMC030 to HMC325
  • Up to 189 kW continuous
  • A preferred choice for freewheeling duties
Staffa HPC dual displacement motor

Dual displacement, high power

Staffa HPC

The high power version of the HMC.

Largest displacement by frame1,600 to 5,326 cc/rev

  • Five frames, HPC080 to HPC325
  • Two displacements, selected hydraulically
  • 250 bar continuous on every frame
Staffa HMF three-speed motor

Three displacements

Staffa HMF

Three preset displacements, chosen from a wide range.

Largest displacement by frame1,600 to 5,326 cc/rev

  • Four frames, HMF100 to HMF325
  • Up to 189 kW continuous, more with the high power option
  • A preferred choice for freewheeling duties
Staffa HPC400 four-speed motor

Four displacements

Staffa HPC400

Two piston banks, each switched between high and low displacement.

Largest displacement6,555 cc/rev

  • 25,000 Nm rated torque
  • 430 kW maximum continuous power
  • 250 bar continuous, 300 bar intermittent
Staffa Smart Motor with digital displacement control

Infinitely variable

Staffa Smart Motor

Digital displacement control on the HPC200 and HPC325 frames.

Largest displacement3,087 and 5,326 cc/rev

  • Displacement changes under load and while rotating
  • Constant torque, constant power or constant speed
  • Speed, direction and shaft position sensing; CANopen on Smart+
Staffa failsafe brake fitted to a Staffa motor

Made by us

Staffa brakes

Failsafe multi-plate brakes made to fit Staffa motors.

Static brake torque2,750 to 32,540 Nm

  • F032, F102, F202 and F402 multi-plate brakes
  • Spring applied, hydraulically released
  • Made by us, and only available from us
Combination drive: Staffa motor, Staffa brake and planetary gearbox

Higher torque

Combination Drive

A Staffa motor, brake and planetary gearbox in one package.

Output torqueUp to 2.5m Nm

  • For duties above about 25 kNm
  • Sized around your torque, speed and duty
  • One drawing, one supplier

Made by us, only from us

Original Staffa brakes

We are the original equipment manufacturer of Staffa brakes and the only source of them. Every brake is made in-house and mounts directly to a Staffa motor.

  • F0322,750 Nm
  • F1026,200 Nm
  • F20213,830 Nm
  • F40232,540 Nm
  • Spring applied and hydraulically released, so the brake holds whenever pressure is removed
  • Static brake torque from 2,750 to 32,540 Nm across four sizes
  • Pairs with a Staffa motor and planetary gearbox in a Combination Drive
Staffa brakesGet a brake price
Staffa failsafe multi-plate brake fitted to a Staffa radial piston motor

7series

Staffa motor seriesFrom fixed to infinitely variable displacement.

8,000cc/rev

Largest displacementHMB500; the smallest HMB030 starts at 188 cc/rev.

25,250Nm

Output torqueHMHDB400 at 250 bar continuous.

430kW

Shaft powerHPC400, maximum continuous.

The range

Staffa motors: high torque at low speed

Staffa motors are Kawasaki’s radial piston hydraulic motors, built for slow, heavy duties that need high torque from a standstill. The range runs from the fixed displacement HMB to the infinitely variable Smart Motor, so the motor can match the way your machine needs to run.

Every Staffa motor carries its model code on the nameplate. Send us the full code and we will match it, or tell you what has replaced it. Our guide explains how to read a Staffa motor model code and which details to send.

We are a UK distributor for Kawasaki Precision Machinery, and we make the Staffa brakes that fit these motors.

Which series?

Start with how the motor needs to run

  • One speed range: the HMB, or the HPB for more speed and power
  • Two speeds, changed on the run: the HMC, or the high power HPC
  • Three speeds: the HMF; four speeds: the HPC400
  • Infinitely variable, with digital control: the Smart Motor
  • Above about 25 kNm: a Combination Drive

Compare the range

Staffa motor series compared

Headline figures from each series datasheet. Displacement is the largest setting on each frame; each series page has every frame, option and rating.

SeriesDisplacementsFrame sizesDisplacement by frame (cc/rev)Continuous pressure (bar)KPM datasheet
HMBOneHMB030 to HMB500188 to 8,000190 to 250M200112.24-HMB
HPBOneHPB060 to HPB325983 to 5,310250M-200601.18-HPB
HMCTwoHMC030 to HMC325492 to 5,326207 to 250M-200203.17-HMC
HPCTwoHPC080 to HPC3251,600 to 5,326250M-200303.17-HPC
HMFThreeHMF100 to HMF3251,600 to 5,326250M-200512.17-HMF
HPC400FourHPC4006,555250M-200403.26-HPC400
Smart MotorInfinitely variableHPC200, HPC3253,087 and 5,326As HPCM-200712.24-HPCe

Sources: Kawasaki Precision Machinery (UK) datasheets, by the codes shown. Some power ratings apply only with crankcase flushing; each series page gives the detail.

Applications

Where Staffa motors work

Marine and offshore

Deck machinery, winches and cranes on cargo vessels, tankers and offshore vessels

Recycling and waste

Shredders and waste treatment plant

Quarrying and mining

Crushers and conveyors

Plastics and die casting

Injection moulding screw drives, die casting machines

Tunnelling

Tunnel boring machines

Bulk handling and ports

Ship loaders, rotating chutes, hatch covers

Let’s find your motor

Looking for a Staffa motor or a price?

We just need three details.

Replacing a Staffa motor? Send us the model code from the nameplate and a photo, and we will work from those.

1

Torque

Continuous and peak, at the motor shaft.

2

Speed

Shaft rpm, and the range if it varies.

3

Duty

Hours per day, starts per hour and direction changes.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Staffa motor questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

Which Staffa motor do I need?

Start with how the motor needs to run. One speed range points to the HMB or HPB, two speeds to the HMC or HPC, three to the HMF and four to the HPC400; the Smart Motor gives infinitely variable displacement. Send us the torque, speed and duty and we will recommend the simplest motor that does the job.

Can you replace an old Staffa motor?

Usually. Every Staffa motor carries a model code on its nameplate. Send us the full code and a photo and we will match the frame, shaft, ports and options, or tell you what has replaced them.

Do you supply Staffa spares?

Yes. We supply genuine KPM spares for Staffa motors. Quote the model code, or the part number from the spares drawing for your frame.

Do you make brakes for Staffa motors?

Yes. We make the Staffa F032, F102, F202 and F402 failsafe multi-plate brakes, from 2,750 to 32,540 Nm static torque, which mount directly to the motor.