Genuine Kawasaki pumps and motors, and genuine KPM spares, supplied and supported from Silsden, West Yorkshire.
Kawasaki range
Choose a Kawasaki pump or motor
Four pump series and the M7V motor. Each card links to the full page for that series.

Open circuit
Kawasaki K3VL
Medium to high pressure, for marine, mobile and industrial machines.
Displacement28 to 200 cc/rev
- 320 bar rated, 350 bar peak
- Load sense, pressure cut-off, torque limiter and electric displacement controls
- SAE and ISO mountings, with through-drive options

Open circuit, mobile
Kawasaki K3VLS
Compact medium-duty pump for load sensing and electric control.
Displacement50 to 150 cc/rev
- 280 bar rated, 350 bar peak
- Load sense, torque limiter, power shift and electric displacement controls
- For mobile machines and industrial vehicles

Open circuit, industrial
Kawasaki K7VG
High-pressure pump for general industrial machinery.
Displacement180 and 270 cc/rev
- 350 bar rated, 400 bar peak
- ISO mount and shaft, with optional SAE through drives
- Mineral oil, polyol ester, or water glycol at 210 bar

Closed circuit
Kawasaki K8V
Closed loop pump for hydrostatic transmissions.
Displacement71 to 130 cc/rev
- 420 bar rated, 500 bar peak
- Electric proportional, hydraulic pilot or manual control
- Charge pump and relief valves as standard options

Axial piston motor
Kawasaki M7V
High-speed variable displacement motor, for open or closed circuits.
Max. displacement88.5 to 215 cc/rev
- 420 bar nominal, 500 bar maximum
- Two-position, proportional and pressure-related displacement controls
- Fixed displacement M7X version available

Also from KPM
More series and genuine spares
Other Kawasaki pumps and motors, and genuine KPM spares for the units you already run.
- K3VG industrial pumps: service, repair and refurbishment
- K3V, K5V and K7V pumps for excavators and mobile machines
- M3X, M3B and M5X swash plate motors
- Genuine KPM spares, matched by model code
270cc/rev
Largest pump displacementK7VG265; the K3VL starts at 28 cc/rev.
420bar
Rated pressureK8V pumps and M7V motors.
4series
Pump seriesK3VL, K3VLS, K7VG and K8V.
6,150rpm
Motor speedM7V85 at reduced displacement.
The range
Kawasaki pumps: axial piston pumps for open and closed circuits
Kawasaki axial piston pumps are variable displacement swash plate pumps. The K3VL, K3VLS and K7VG run in open circuits, from compact load-sensing mobile pumps to high-pressure industrial units, and the K8V runs in closed circuits for hydrostatic transmissions.
The M7V motor completes a Kawasaki hydrostatic drive: a high-speed variable displacement swash plate motor for open and closed circuits. Every pump and motor carries its model code on the nameplate, and that code is all we need to match a replacement or a spare.
We are a UK distributor for Kawasaki Precision Machinery, supplying Kawasaki pumps and motors and genuine KPM spares, alongside the Staffa motors we supply and the Staffa brakes we make.
Which pump?
Start with the circuit and the pressure
Compare the range
Kawasaki pumps and motors compared
Headline figures from each KPM datasheet. Displacement is per size, from smallest to largest.
| Series | Type | Circuit | Displacement (cc/rev) | Rated pressure (bar) | Peak pressure (bar) | Source |
|---|---|---|---|---|---|---|
| K3VL | Variable pump | Open | 28 to 200 | 320 | 350 | KPM UK datasheet MYK6500, 2023 |
| K3VLS | Variable pump | Open | 50 to 150 | 280 | 350 | KPM UK datasheet PDC019, February 2022 |
| K7VG | Variable pump | Open | 180 and 270 | 350 | 400 | KPM catalogue KPM2021, November 2020 |
| K8V | Variable pump | Closed | 71 to 130 | 420 | 500 | Kawasaki product page |
| M7V | Variable motor | Open or closed | 88.5 to 215 | 420 nominal | 500 | KPM M7V and M7X catalogue |
Sources as listed, opened 14 October 2026. Pressures given in MPa are converted at 1 MPa = 10 bar. The K7VG265 displaces 270 cc/rev and the K8V125 130 cc/rev.
Applications
Where Kawasaki pumps work
Construction
Wheel loaders, dozers, backhoe and track loaders, cranes
Agriculture and forestry
Tractors, combine harvesters, sprayers, forestry machines
Materials handling
Forklift trucks, telehandlers, access platforms
Quarrying and road building
Crushers, asphalt pavers and compactors
Drilling and lifting
Drill rigs and crane winches, with the M7V motor
Marine and industrial
Marine and industrial hydraulic systems, from the K3VL to the K7VG
Let’s find your pump
Looking for a Kawasaki pump or a price?
We just need three details.
Replacing a pump? Send us the model code from the nameplate and a photo, and we will work from those.
1
Flow
Displacement, or the flow you need at your drive speed.
2
Pressure
Working and peak pressure.
3
Control
Load sense, pressure cut-off, torque limit or electric.
Prefer us to call you? Request a callback.
FAQs
Kawasaki pump questions
Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.
Which Kawasaki pumps can you supply?
This page covers the K3VL, K3VLS and K7VG open circuit pumps, the K8V closed circuit pump and the M7V motor. We also service, repair and refurbish K3VG pumps; ask us about other KPM series and genuine KPM spares.
What is the difference between the K3VL and the K3VLS?
The K3VL is a medium to high pressure pump, rated 320 bar, from 28 to 200 cc/rev, for marine, mobile and industrial use. The K3VLS is a compact medium-duty pump, rated 280 bar, from 50 to 150 cc/rev, built for load sensing and electric displacement control on mobile machines.
Can a K7VG run on fire-resistant fluid?
Yes, with the right seals and materials. KPM rates it at 350 bar on mineral oil and polyol ester, and 210 bar on water glycol, and asks to be consulted on fire-resistant fluids.
Do you supply genuine KPM spares?
Yes. Send us the model code from the pump or motor nameplate and we will match the spares, or the replacement unit.
What is the M7V motor used for?
Hydrostatic transmissions, drill rigs and crane winches. It is a high-speed variable displacement motor for open or closed circuits, and a fixed displacement M7X version is available.
