Home › Products › Eckart actuators › E3
Eckart E3 Rotary Actuator
Compact rotary actuator for mobile machines, up to 210 bar.
Home › Products › Eckart actuators › E3
Compact rotary actuator for mobile machines, up to 210 bar.
Up to 3,600 Nm, with bearings built in and a through hole for hoses or cables. Supplied and supported in the UK from Silsden, West Yorkshire.
3,600Nm
TorqueSize 170 at 210 bar.
210bar
Operating pressureHigher on request; minimum 5 to 10 bar.
360°
Rotation180° or 360° as standard, and any angle between.
Overview
The E3 is Eckart’s rotary actuator for mobile hydraulics, and for work platforms in particular. Helical gears turn hydraulic pressure into rotation in a very compact housing, with nearly backlash-free positioning and a play-free roller bearing that keeps a platform steady as it moves sideways.
Bearings for the full load are built into the actuator, so the platform needs none of its own. A continuous hole through the shaft carries hoses or cables, and the platform stays in place even if the actuator is damaged axially. A valve block adds load holding, clamping and overpressure protection.
We supply Eckart’s hydraulic range in the UK, with help choosing the right size and support from Silsden. Our photos show the actuators in red; they are supplied grey as standard, and special colours are available.
Which Eckart actuator?
Key advantages
Nearly backlash-free threads and a play-free roller bearing reduce wobble on the move.
Takes the full load and the rotation, so the platform needs no separate bearings.
A continuous hole for hoses or cables, or a screw for extra security.
Double shaft and piston sealing with lip seals.
An ultra-compact housing with high bearing load capacity, in high-strength steel.
The load can be attached on one or both sides, with the same torque in each direction.
Technical data
Size is the piston diameter. Torque is the maximum at 210 bar.
| Size | Max. torque (Nm) | Standard rotation |
|---|---|---|
| 95 | 720 | 180° or 360° |
| 125 | 1,250 | 180° or 360° |
| 150 | 2,350 | 180° or 360° |
| 170 | 3,600 | 180° |
Any intermediate angle to order. Minimum pressure 5 to 10 bar; −25 to +70 °C, wider on request; hydraulic fluids to DIN 51524, with HFC and HFD fluids on request; flange threads metric or inch. Eckart’s product page lists five sizes from 50 Nm; the catalogue covers the four above, so ask us about the smallest size. Dimensions are in the catalogue. Sources: Eckart E3 catalogue (production 08/2007) and product page.
Applications
Rotating the work platform on aerial and mobile work platforms
Slewing and positioning on mobile hydraulic equipment
Linear actuation and bending machines
Gate valve control
Working at 100 bar or less? The E1 is built for low-pressure hydraulics.
Sizing help
Send us the platform load, pressure and rotation angle, and we will size the E3 for you.
Replacing an actuator
Every E3 carries its type code on the type plate. Send us the full code and we will match the size, angle and valve block.
The type code from the type plate, a photo of the actuator and its mounting, and what it moves.
Send us the type code and we will source genuine Eckart spare parts or arrange a repair. Call us and we will talk it through.
Model code
Let’s find your actuator
We just need three details.
Replacing one? Send us the type code from the type plate and a photo, and we will work from those.
1
The torque needed, and at what pressure.
2
Rotation angle, plus stroke if it is rotary-linear.
3
Cycle time, environment, and any ATEX or SIL needs.
Prefer us to call you? Request a callback.
FAQs
Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.
No. Bearings for the full load and the rotation are built into the actuator, so the platform needs no separate bearings.
Hoses or cables can run through the shaft. A screw can also be fitted there for extra security at the fastening straps.
It can add load holding on an incline, clamping against sideways wobble, and overpressure protection against system pressure or a rise in temperature.
180° or 360° as standard, and any angle in between. The largest size, 170, is 180° in the catalogue.
Grey as standard. The photos on our site show them in red, and special colours are available on request.