Helical hydraulic actuators, made in Germany by Eckart since 1969, supplied and supported in the UK from Silsden, West Yorkshire.
Eckart range
Choose an Eckart actuator
Six ranges, all working on the helical gear principle. Each card links to the full page for that range.

Up to 250 bar
Eckart SM4
The heavy-duty rotary actuator, in 13 sizes.
Max. torque at 250 bar180 to 85,000 Nm
- Rotation of 90°, 180°, 270° or 360°, any angle between, and beyond 360°
- Gear shaft, gear hub or hollow shaft
- Options include ATEX, salt water resistance and special colours

Up to 100 bar
Eckart E1
The smallest in the range, for low-pressure hydraulics.
Max. torque at 100 bar74 to 2,450 Nm
- Six sizes
- Made for 40, 60, 80 or 100 bar systems
- Rotation of 90° to 360°, any angle between, and beyond

Up to 210 bar
Eckart E3
Built for mobile machines, with a through-hole shaft.
Max. torque at 210 bar50 to 3,600 Nm
- Five sizes
- Bearings built in, so a work platform needs none of its own
- Valve block options for load holding, clamping and overpressure protection

Rotary and linear
Eckart HSE4
Rotation and stroke from one compact unit.
Max. torque at 100 bar65 to 2,050 Nm
- Push force from 12,500 to 122,000 N at 100 bar
- Stroke from 10 to 1,200 mm, longer on request
- Rotary and linear motion driven separately or together

Valve actuators
Eckart HyRAV Flex
Quarter-turn hydraulic actuators for valves of every size.
Torque500 to 250,000 Nm
- 15 sizes, with an EN ISO 5211 valve flange
- Double acting, or single acting with spring return for fail-safe duty
- ATEX and SIL2 certified

Multi-axis
Eckart 2AxA and 3AxA
Two- and three-axis actuators that move and hold the heaviest loads.
2AxA max. torque at 210 bar11,000 and 49,000 Nm
- Two axes on the 2AxA; X, Y and Z on the 3AxA
- Up to 250 bar on the 2AxA
- For booms, heavy cranes, offshore and shipyard handling
250,000Nm
Maximum torqueThe largest HyRAV Flex, the AS250.
250bar
Operating pressureSM4, 2AxA and EHZ; higher on request.
15sizes
HyRAV Flex valve actuatorsFrom 500 to 250,000 Nm.
1969
Made in Germany sinceBy Eckart GmbH in Schlüchtern.
The range
Eckart actuators: high torque from a compact unit
Eckart rotary actuators turn hydraulic pressure into rotation with the helical gear principle. Pressure drives a piston along a helical spline inside a sealed housing, and the spline turns the output shaft. The result is high torque in a small space, and a shaft that holds the position it reaches.
The range covers heavy-duty and low-pressure rotary actuators, a rotary-linear unit, quarter-turn valve actuators and multi-axis actuators. Eckart also makes EHZ hydraulic cylinders up to 250 bar and special cylinders up to 300 bar.
We supply Eckart’s hydraulic range in the UK, with help choosing the right size and support from Silsden. Our photos show the actuators in red; they are supplied grey as standard, and special colours are available.
Which actuator?
Start with the motion you need
- Rotation under heavy load, up to 250 bar: the SM4
- Low-pressure systems up to 100 bar: the E1
- Mobile machines and work platforms: the E3
- Rotation and stroke together: the HSE4
- Opening and closing valves: HyRAV Flex
- Movement in two or three axes: the 2AxA or 3AxA
Compare the range
Eckart actuators compared
Headline figures from Eckart’s product pages and catalogues. Torque is the maximum at the pressure shown.
| Series | Type | Max. torque (Nm) | Max. pressure (bar) | Motion | Sizes |
|---|---|---|---|---|---|
| SM4 | Rotary actuator | 180 to 85,000 | 250 | 90° to 360°, and beyond | 13 |
| E1 | Rotary actuator, low pressure | 74 to 2,450 | 100 | 90° to 360°, and beyond | 6 |
| E3 | Rotary actuator, mobile | 50 to 3,600 | 210 | 180° or 360°, and between | 5 |
| HSE4 | Rotary-linear actuator | 65 to 2,050 | 100 | Rotation, plus 10 to 1,200 mm stroke | 6 |
| HyRAV Flex | Valve actuator | 500 to 250,000 | 210 | 90° quarter turn | 15 |
| 2AxA | Two-axis actuator | 11,000 and 49,000 by axis | 250 | 180° and 365° by axis | Configured |
| 3AxA | Three-axis actuator | On request | On request | X, Y and Z axes | Configured |
Sources: Eckart GmbH English product pages and catalogues, opened 14 October 2026. SM4 torque is for the 13 catalogue sizes; Eckart’s product page quotes up to 250,000 Nm. Also from Eckart: EHZ hydraulic cylinders, 40 to 200 mm piston diameter, strokes up to 2,000 mm and 250 bar; and special cylinders up to 300 bar and 1,500 mm stroke.
Applications
Where Eckart actuators work
Oil, gas and power
Valve automation in refineries, pipelines, tank farms and power plants
Water
Valve control in water treatment, sewage and drinking water networks
Marine and offshore
Shipbuilding, offshore platforms and heavy-duty cranes
Mining and construction
Boom positioning on drilling vehicles, bridge building
Machine building
Tool change, bending machines, workpiece positioning
Mobile machines
Work platforms and slewing on mobile equipment
Let’s find your actuator
Looking for an Eckart actuator or a price?
We just need three details.
Replacing an actuator? Send us the type plate details and a photo, and we will work from those.
1
Torque
The torque needed, and at what pressure.
2
Motion
Rotation angle, plus stroke if it is rotary-linear.
3
Duty
Cycle time, environment, and any ATEX or SIL needs.
Prefer us to call you? Request a callback.
FAQs
Eckart actuator questions
Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.
How does an Eckart rotary actuator work?
Hydraulic pressure drives a piston along a helical spline inside a sealed housing, and the spline turns the output shaft. It gives high torque in a small space and holds the position it reaches.
Do you supply Eckart pneumatic actuators?
No. We supply Eckart’s hydraulic range only: rotary, rotary-linear, valve and multi-axis actuators, and hydraulic cylinders.
What colour are Eckart actuators?
Grey as standard. The photos on our site show them in red, and special colours are available on request.
Can HyRAV Flex actuators fail safe?
Yes. Single-acting HyRAV Flex actuators use a spring return for fail-safe opening or closing, and double-acting versions are also available. The range is ATEX and SIL2 certified.
Can an Eckart actuator be built to suit?
Yes. Rotation angle, shaft type, pressures above 250 bar, ATEX certification and salt water resistance are among the SM4 options, and Eckart builds special cylinders to order.
