Home › Products › Kawasaki pumps › K7VG
Kawasaki K7VG Axial Piston Pump
High-pressure open circuit pump for industrial machinery, 350 bar rated.
Home › Products › Kawasaki pumps › K7VG
High-pressure open circuit pump for industrial machinery, 350 bar rated.
Two sizes, 180 and 270 cc/rev, with an ISO mount and shaft and optional through drives. Supplied and supported in the UK from Silsden, West Yorkshire.

270cc/rev
DisplacementK7VG265; the K7VG180 gives 180 cc/rev.
350bar
Rated pressure400 bar peak, on mineral oil or polyol ester.
299kW
Maximum input powerK7VG265; 231 kW for the K7VG180.
210bar
On water glycolWith the water glycol version.
Overview
The K7VG is a variable displacement swash plate pump for open circuits, developed for general industrial machinery. It is rated at 350 bar with 400 bar peaks, with high-load bearings for long life and a semi-cylindrical swash plate and anti-vibration support for low noise.
Two sizes give 180 and 270 cc/rev on an ISO mount and shaft. Controls combine torque limiting, pressure cut-off, remote pressure control, load sensing and negative, positive or electric flow control, and versions run on polyol ester or water glycol where the fluid must resist fire.
We are a UK distributor for Kawasaki Precision Machinery, supplying Kawasaki pumps and motors and genuine KPM spares, with help choosing the right unit and support from Silsden.
Which Kawasaki pump?
Key advantages
Designed for high-pressure hydraulic systems, with 400 bar peaks.
High-load bearings and shoe contact mechanisms reduce wear.
A spherical valve plate keeps efficiency up at low pressure and speed, and primes fast.
A compact housing, semi-cylindrical swash plate and anti-vibration support cut noise and pulsation.
Flow, pressure and power controls, and combinations of them.
An SAE through drive takes an auxiliary pump, which can save a separate control or boost pump.
Technical data
Both sizes are rated at 350 bar and 400 bar peak on mineral oil.
| Size | Displacement (cc/rev) | Self-priming speed (rpm) | Max. speed, boosted (rpm) | Max. input torque (Nm) | Max. input power (kW) | Weight (kg) |
|---|---|---|---|---|---|---|
| K7VG180 | 180 | 1,800 | 2,200 | 1,003 | 231 | 145 |
| K7VG265 | 270 | 1,500 (H: 1,600) | 1,500 (H: 1,900) | 1,504 | 299 | 225 |
H is the high-speed version. Case pressure 1 bar continuous, 4 bar peak. Mineral oil and polyol ester: 350 bar, 20 to 60 °C recommended. Water glycol: 210 bar, 10 to 50 °C. Fire-resistant fluids may need special seals and cooling, so talk to us first. Cleanliness ISO 4406 -/18/15 or better. Source: KPM catalogue K7VG (KPM2021, edition A, November 2020).
Applications
High-pressure open circuit systems on general industrial machinery
Polyol ester or water glycol versions, where the fluid must resist fire
Need a smaller pump? The K3VL runs from 28 to 200 cc/rev at 320 bar.
Sizing help
Send us the flow, pressure, drive speed, fluid and control you need, and we will size the K7VG for you.
Replacing a pump
Every K7VG carries its full model code on the nameplate. Send it to us and we will match the size, fluid, controls and through drive, or source genuine KPM spares.
The full model code from the nameplate, and photos of the nameplate, shaft and regulator. The code covers the size, controls, mounting and shaft.
Send us the model code and we will source genuine KPM spare parts, or a replacement unit. Call us and we will talk it through.
Model code
Let’s find your pump
We just need three details.
Replacing one? Send us the model code from the nameplate and a photo, and we will work from those.
1
Displacement, or the flow you need at your drive speed.
2
Working and peak pressure.
3
Load sense, pressure cut-off, torque limit or electric.
Prefer us to call you? Request a callback.
FAQs
Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.
Yes, in the versions built for it. KPM rates it at 350 bar on mineral oil and polyol ester, and 210 bar on water glycol. Fire-resistant fluids may need special seals and cooling, so talk to us first.
That is the displacement KPM gives for the K7VG265. The model name and the displacement simply differ.
Yes. SAE A to SAE D through drives take an auxiliary pump, which can save a separate control or boost pump.
A high-speed K7VG265, which self-primes to 1,600 rpm and runs to 1,900 rpm with a boosted inlet.
Yes. Send us the model code from the nameplate and we will source genuine KPM spare parts or a replacement pump.