Home › Products › Kawasaki pumps › M7V
Kawasaki M7V Axial Piston Motor
High-speed variable displacement motor, 420 bar nominal.
Home › Products › Kawasaki pumps › M7V
High-speed variable displacement motor, 420 bar nominal.
Four sizes from 88.5 to 215 cc/rev, for open or closed circuits, with a fixed M7X version. Supplied and supported in the UK from Silsden, West Yorkshire.

215cc/rev
Largest sizeM7V212; the M7V85 gives 88.5 cc/rev.
420bar
Nominal pressure500 bar maximum.
6,150rpm
Maximum speedM7V85 at reduced displacement.
436kW
PowerM7V212, theoretical.
Overview
The M7V is a variable displacement swash plate motor for open and closed circuits, built for construction machinery and industrial vehicles. It gives high power density from a compact, quiet motor, with long bearing life and strong performance at both high and low speed.
Four sizes run from 88.5 to 215 cc/rev at 420 bar nominal and 500 bar maximum, with the minimum displacement adjustable down to zero. Two-position, proportional and pressure-related controls, flushing valves and a speed sensor suit it to the drive. Pair it with a K8V pump for a complete Kawasaki hydrostatic transmission.
We are a UK distributor for Kawasaki Precision Machinery, supplying Kawasaki pumps and motors and genuine KPM spares, with help choosing the right unit and support from Silsden.
M7V or M7X?
Key advantages
Superior performance at high and low speed, to 6,150 rpm on the M7V85.
Up to 436 kW from a compact motor.
Low noise, in a compact size.
Long bearing life for hard-working mobile drives.
Minimum displacement adjustable down to zero.
Two-position, proportional and pressure-related controls for a wide range of drives.
Technical data
Theoretical values at 420 bar nominal; 500 bar maximum. Speeds are at full displacement and at reduced displacement.
| Size | Max. displacement (cc/rev) | Max. speed (rpm) | Torque (Nm) | Max. flow (L/min) | Power (kW) | Weight (kg) |
|---|---|---|---|---|---|---|
| M7V85 | 88.5 | 3,900 / 6,150 | 592 | 345 | 242 | 39 |
| M7V112 | 112 | 3,550 / 5,600 | 749 | 398 | 278 | 46 |
| M7V160 | 160 | 3,100 / 4,900 | 1,070 | 496 | 347 | 65 |
| M7V212 | 215 | 2,900 / 4,600 | 1,437 | 623 | 436 | 90 |
Reduced-displacement speed applies below 0.6 of maximum displacement (0.4 on the M7V212), with internal cooling. Maximum displacement adjustable down to 68, 90, 128 or 170 cc/rev by size; minimum adjustable from zero. Fluid −20 to +90 °C at the inlet, to +115 °C at the drain. Mineral oil anti-wear hydraulic fluid; 10 to 200 cSt normal, 10 to 1,000 cSt allowable; cleanliness ISO 4406 -/18/15 or better. For winches, KPM excludes proportional and pressure-related controls that start at minimum displacement. Source: KPM M7V/M7X catalogue.
Applications
Hydrostatic drives in open or closed circuits
Variable speed drives needing high power density
Drill rigs and crane winches, with suitable controls
Need low speed and very high torque? Staffa radial piston motors are low-speed, high-torque motors from KPM.
Sizing help
Send us the speed range, torque, pressure and control you need, and we will size the M7V for you.
Replacing a motor
Every M7V carries its full model code on the nameplate. Send it to us and we will match the size, displacements, control and valves, or source genuine KPM spares.
The full model code from the nameplate, and photos of the nameplate, shaft and regulator. The code covers the size, displacements, control and valves.
Send us the model code and we will source genuine KPM spare parts, or a replacement unit. Call us and we will talk it through.
Model code
Let’s find your motor
We just need three details.
Replacing one? Send us the model code from the nameplate and a photo, and we will work from those.
1
Maximum and minimum displacement, or the speed range you need.
2
Working and peak pressure.
3
Two-position, proportional or pressure-related.
Prefer us to call you? Request a callback.
FAQs
Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.
Yes. KPM rates it for both, and it pairs with the Kawasaki K8V pump in a closed loop drive.
Up to 3,900 rpm at full displacement on the M7V85, and 6,150 rpm at reduced displacement. The larger sizes run a little slower.
Yes, the M7X, in sizes 85, 112 and 160, at 420 bar nominal and 500 bar maximum.
Yes, with the right control. KPM does not allow proportional or pressure-related controls that start at minimum displacement on winches, so tell us the duty and we will specify it.
Yes. Send us the model code from the nameplate and we will source genuine KPM spare parts or a replacement motor.