Home › Products › Kawasaki pumps › K8V
Kawasaki K8V Closed Circuit Pump
Variable displacement pump for closed loop drives, 420 bar rated.
Home › Products › Kawasaki pumps › K8V
Variable displacement pump for closed loop drives, 420 bar rated.
Three sizes from 71 to 130 cc/rev, for hydrostatic transmissions on mobile machines. Supplied and supported in the UK from Silsden, West Yorkshire.

130cc/rev
Largest sizeK8V125; the K8V71 gives 71 cc/rev.
420bar
Rated pressure500 bar peak.
3,300rpm
Maximum speedK8V71; 2,850 rpm for the K8V125.
Overview
The K8V is a variable displacement swash plate pump for closed loop systems, the pump side of a hydrostatic transmission. Flow is set by mechanical feedback of the swash plate position, for precise control, and Kawasaki’s efficiency and noise reduction work gives high efficiency and low noise.
Three sizes give 71, 90 and 130 cc/rev at 420 bar rated and 500 bar peak. A charge pump, high and low pressure relief valves and a cut-off valve are standard options. Pair it with an M7V motor for a complete Kawasaki drive.
We are a UK distributor for Kawasaki Precision Machinery, supplying Kawasaki pumps and motors and genuine KPM spares, with help choosing the right unit and support from Silsden.
Which Kawasaki pump?
Key advantages
Top-level pump efficiency and low noise from Kawasaki’s design work.
Mechanical feedback of the swash plate position sets the flow.
High reliability and long life at 420 bar rated pressure.
Charge pump, high and low pressure relief and cut-off valves as standard options.
Electric proportional, hydraulic pilot or manual displacement control.
Pairs with the Kawasaki M7V variable motor for a hydrostatic transmission.
Technical data
Rated at 420 bar with 500 bar peaks.
| Size | Displacement (cc/rev) | Rated pressure (bar) | Peak pressure (bar) | Max. speed (rpm) | Weight, approx. (kg) |
|---|---|---|---|---|---|
| K8V71 | 71 | 420 | 500 | 3,300 | 60 |
| K8V90 | 90 | 420 | 500 | 3,050 | 75 |
| K8V125 | 130 | 420 | 500 | 2,850 | 95 |
Source: Kawasaki K8V product page, pressures converted from MPa. Kawasaki publishes no K8V datasheet in the UK, so ask us for drawings, control curves and the model code for your application.
Applications
Wheel loaders, dozers, backhoe and track loaders, dump trucks
Crushers, compactors and asphalt pavers
Forklift trucks and telehandlers
Combine harvesters, sprayers and forestry equipment
Sizing help
Send us the flow, pressure, drive speed and control you need, and we will size the K8V for you.
Replacing a pump
Every K8V carries its model code on the nameplate. Send it to us and we will match the size, controls and valves, or source genuine spares.
The full model code from the nameplate, and photos of the nameplate, shaft and regulator. The code covers the size, controls, mounting and shaft.
Send us the model code and we will source genuine KPM spare parts, or a replacement unit. Call us and we will talk it through.
Checklist
Let’s find your pump
We just need three details.
Replacing one? Send us the model code from the nameplate and a photo, and we will work from those.
1
Displacement, or the flow you need at your drive speed.
2
Working and peak pressure.
3
Load sense, pressure cut-off, torque limit or electric.
Prefer us to call you? Request a callback.
FAQs
Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.
Closed loop hydrostatic transmissions on mobile machines, such as wheel loaders, dozers, forklift trucks, telehandlers, compactors and combine harvesters.
The Kawasaki M7V variable displacement motor runs in closed circuits and pairs with the K8V for a complete Kawasaki drive.
420 bar rated and 500 bar peak.
Not for the UK. Ask us and we will get drawings, control curves and data for your application.
That is the displacement Kawasaki gives for the K8V125. The model name and the displacement simply differ.