Skip to main content

Home › Products › Staffa motors › HPB

Staffa HPB Radial Piston Motor

Fixed displacement. More speed and power.

From 983 to 5,310 cc/rev and up to 23,000 Nm. Genuine Kawasaki Staffa motors and spares, supplied and supported from Silsden, West Yorkshire.

Get a priceSend us your model code
Staffa HPB high power radial piston hydraulic motor

5,310cc/rev

Largest displacementHPB325; the HPB060 starts at 983 cc/rev.

23,000Nm

Output torqueUp to, across the range.

278kW

Shaft powerHPB270 and HPB325 with crankcase flushing.

250bar

Continuous pressure300 bar intermittent.

Overview

The Staffa HPB motor: more speed and power from one displacement

The Staffa HPB is Kawasaki’s high power fixed displacement radial piston motor. It keeps the rugged, proven Staffa design and adds higher speed and power ratings, for duties that ask more of a single displacement.

Eight frames run from HPB060 to HPB325, covering 983 to 5,310 cc/rev, with output torque up to 23,000 Nm and up to 215 kW continuous, or 278 kW with crankcase flushing. Heavy duty HPHDB versions with stronger shafts are offered on the 125 to 325 frames.

We are a UK distributor for Kawasaki Precision Machinery, supplying HPB motors and genuine KPM spares, and we make the Staffa brakes designed for Staffa motors.

Which Staffa motor?

Choose the HPB when one displacement needs more power

  • Lower speed and power is enough: the HMB, from 188 cc/rev
  • Change speed on the run: the dual displacement HPC or HMC
  • A duty where the motor must freewheel: the HMC, HPC or HMF
  • Above about 25 kNm: a Combination Drive

Key advantages

Why choose a Staffa HPB

More power from one displacement

Up to 215 kW continuous, and up to 278 kW with crankcase flushing.

High torque at low speed

Output torque up to 23,000 Nm, with an increased starting torque option for slow, frequent starts.

Hydrostatic balancing

Long wear life, with high volumetric and mechanical efficiency.

Quiet running

Airborne noise below 66.7 dB(A) across the continuous operating range.

Fits the machine you have

A wide range of shafts, ports and mounting interfaces, with heavy duty shafts on the larger frames.

Built for hard places

Marine paint and cylinder heads, improved shaft seal life, thermal shock resistance. ATEX enquiries are subject to confirmation of the current motor specification and documentation by Kawasaki Precision Machinery.

Technical data

Staffa HPB technical specifications

Ideal torque is the theoretical torque per bar; multiply it by the working pressure and the running efficiency for output torque. Where two figures are shown, the first is with the FM3 valve housing and the second with FM4.

Frame codeDisplacement (cc/rev)Ideal torque (Nm/bar)Running efficiency (%)Continuous speed (rpm)Continuous power (kW)With flushing (kW)
HPB06098315.693.0450 / 490115131
HPB0801,34421.494.4340 / 430130147
HPB1001,60025.594.5270 / 365140165
HPB125Also HPHDB1252,05032.694.5215 / 300135 / 150173 / 202
HPB150Also HPHDB1502,47039.395.4200 / 250156 / 185195 / 234
HPB200Also HPHDB2003,08749.196.3175 / 230174 / 210216 / 261
HPB270Also HPHDB2704,31068.695.8150215278
HPB325Also HPHDB3255,31084.596.3130215278

Continuous pressure is 250 bar. Intermittent pressure, 300 bar, is allowed up to 50 rpm for 15% of the duty in periods of up to 5 minutes, and above 50 rpm for 2% of the duty in periods of up to 30 seconds; static pressure is 405 bar to DNV rules. Source: KPM UK HPB datasheet (file M-200601.18-HPB), which also gives starting efficiency, torque curves and fluid limits.

Options

Options and configurations

Every option is set in the model code, so a replacement motor can be matched exactly.

Shafts

Parallel keyed, splined and DIN 5480 shafts on every frame, coded P, S, Z, T and Q with numbered variants on the larger frames. Heavy duty HPHDB shafts (P2, S5, Z5) take up to 15,900 Nm of radial bending moment on the 270 and 325 frames.

Valve housings

The SM3 manifold housing, or F3 and FM3 or F4 and FM4 SAE flange housings, depending on frame. The FM4 housing allows higher speed and power.

Speed sensing

Tj: a dual-channel Hall effect sensor giving speed and direction, 16 pulses per revolution, sealed to IP68 and powered from 8 to 32 V. Tk adds a T401 module with a tacho, a relay and a 0/4 to 20 mA output.

Seals

A high pressure shaft seal, rated 10 bar continuous case pressure, for cold climates, and a stainless steel shaft sleeve for corrosive conditions.

Paint and cylinder heads

Marine primer paint, marine-style cylinder heads that shed water, and marine paint finishes.

Performance options

Increased starting torque, anti-clockwise rotation, improved cavitation resistance for overrunning loads, and thermal shock resistance for cold starts.

Fluids

Mineral oil as standard. Phosphate ester (HFD) with the F3 prefix at full pressure, and water-based fluids (HFA, HFB and HFC) with the F11 prefix at reduced ratings.

Brakes and gearing

Staffa failsafe multi-plate brakes, made by us for Staffa motors, and a planetary gearbox in a Combination Drive when you need more torque. Send us the motor code and we will confirm the fit.

Applications

Where HPB motors work

Marine and offshore

Deck and mooring winches, deck cranes, ROV launch systems, pipe handling

Recycling and waste

Shredders and waste treatment plant

Quarrying and mining

Crushers and conveyors

Plastics and die casting

Injection moulding screw drives, die casting machines

Tunnelling

Tunnel boring machines

Does the motor need to freewheel? KPM prefers the HMC, HPC or HMF, which freewheel in zero displacement.

Downloads

Staffa HPB downloads

Current documents from Kawasaki Precision Machinery (UK). No forms, no sign-up.

Staffa HPB datasheet

M-200601.18-HPB · PDF

Download

Staffa ATEX reference — confirm current documentation

M-10.18 · HMB, HPB, HMC, HPC and HMF · PDF

Download

Installation and spares drawings

KPM lists these with the HMB frames

View

3D CAD models

By model code, on request

Ask us

Can’t find it?

Need the drawing for your exact motor?

Send us the model code from the nameplate and we will find the right drawing, CAD model or spares list.

Replacing a motor

Replacing an existing HPB motor

Every HPB carries its model code on the nameplate. Send us the full code and we will match the frame, shaft, ports and options, or tell you what has replaced them.

Moving up from an HMB?

The HPB covers the same frame sizes as the HMB from 060 to 325, with higher speed and power ratings. Send us both model codes and the duty, and we will check the fit.

What to send us

The full model code, a photo of the nameplate, photos of the shaft and port face, and what the motor drives.

Spares and repairs

We supply genuine KPM spares for HPB motors. Quote the model code, or the part number from the spares drawing. Need a repair rather than a replacement? Call us and we will talk it through.

Model code

How to read an HPB model code

  1. Fluid: blank for mineral oil, F3 for phosphate ester, F11 for water-based fluids
  2. Model: HPB, or HPHDB for heavy duty
  3. Frame size: 060 to 325
  4. Shaft type: such as S3 or P1
  5. Shaft orientation: blank, or V for vertically up
  6. Main ports: such as SM3, FM3 or FM4
  7. Speed sensor: blank, Tj or Tk
  8. Design series: the current series number
  9. Special features: a P code for catalogued options, or PL for features KPM numbers individually

Let’s find your motor

Looking for an HPB motor or a price?

We just need three details.

Replacing one? Send us the model code from the nameplate and a photo, and we will work from those.

1

Torque

Continuous and peak, at the motor shaft.

2

Speed

Shaft rpm, and the range if it varies.

3

Duty

Hours per day, starts per hour and direction changes.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Staffa HPB questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

What is the difference between the HPB and the HMB?

Both are fixed displacement Staffa motors. The HPB is rated for higher speed and power: up to 215 kW continuous, or 278 kW with crankcase flushing, across eight frames from 983 to 5,310 cc/rev.

What is HPHDB?

The heavy duty HPB, with stronger P2, S5 and Z5 shafts for higher radial loads, on the 125, 150, 200, 270 and 325 frames.

Do I need crankcase flushing?

Only for the higher power ratings; the datasheet gives continuous power with and without it. In cold conditions, KPM recommends at least 5 l/min of flushing while the motor is idle.

Can an HPB motor freewheel?

Yes, with both ports connected and the circuit boosted, but it needs large recirculating flows and cooling. KPM prefers the HMC, HPC or HMF for freewheeling duties.

Which fluids can an HPB run on?

Mineral oil as standard. Phosphate ester (HFD) runs with the F3 prefix at the full 250 bar continuous. Water-based fluids (HFA, HFB and HFC) run with the F11 prefix at 103 to 138 bar continuous depending on type, and HFA and HFC at half the mineral oil speed limits.