Skip to main content

Home › Products › Eckart actuators › SM4

Eckart SM4 Rotary Actuator

Heavy-duty helical rotary actuator, up to 250 bar.

Thirteen sizes from 180 to 85,000 Nm, with any rotation angle, including beyond 360°. Supplied and supported in the UK from Silsden, West Yorkshire.

Get a priceSend us your type code
Eckart SM4 hydraulic rotary actuator

13sizes

Catalogue sizesPiston diameters from 40 to 300 mm.

85,000Nm

TorqueSize 300 at 250 bar; size 40 gives 180 Nm.

250bar

Operating pressureHigher on request; minimum 5 to 10 bar.

360°+

RotationAny angle, including beyond 360°.

Overview

The Eckart SM4: high torque from a compact rotary actuator

The SM4 is Eckart’s heavy-duty hydraulic rotary actuator. Pressure moves a piston between two end stops, and opposed helical gears turn that stroke into rotation of the drive shaft, doubling the angle for a given stroke. Solid seals mean no internal leakage, so the actuator holds a load at any position.

Thirteen catalogue sizes run from 180 to 85,000 Nm at 250 bar, with 90°, 180°, 270° or 360° rotation as standard and any angle between or beyond. A four-point bearing carries radial and axial loads, and Eckart end cushioning absorbs the energy at the end of travel.

We supply Eckart’s hydraulic range in the UK, with help choosing the right size and support from Silsden. Our photos show the actuators in red; they are supplied grey as standard, and special colours are available.

Which Eckart actuator?

Start with the motion you need

  • Rotation under heavy load, up to 250 bar: the SM4
  • Low-pressure systems up to 100 bar: the E1
  • Mobile machines and work platforms: the E3
  • Rotation and stroke together: the HSE4
  • Opening and closing valves: HyRAV Flex
  • Movement in two or three axes: the 2AxA or 3AxA

Key advantages

Why choose the Eckart SM4

Holds any position

Solid seals with no internal leakage hold the load wherever the shaft stops.

250 bar, compact

High torque from a small installation space, economical from about 20 bar.

Takes real loads

A four-point bearing carries radial and axial loads, with low hydraulic axial load on the shaft.

Soft end of travel

Eckart end cushioning absorbs kinetic energy and limits pressure peaks.

Adjustable

Adjustable drive shaft datum and an externally adjustable end stop of ±5° as standard.

Long life

Nitrided, wear-resistant moving parts and seals with anti-extrusion back-up rings.

Technical data

Eckart SM4 technical specifications

Size is the piston diameter. Torque is the maximum at 250 bar; weights run from 90° to 360° versions.

SizeMax. torque (Nm)Specific torque (Nm/bar)Absorption (cm³ per °)Time per 90° (s)Weight (kg)Radial load (kN)
401800.720.1700.135.5 to 7.01.45
503751.500.3520.188.8 to 11.13.10
637352.940.6690.2411.5 to 15.54.80
801,3005.21.3230.2621.0 to 27.59.80
1002,70010.82.6240.4337 to 5217.00
1255,40021.65.1540.5565 to 9625.60
1408,40033.67.8190.6392 to 13432.00
16012,80051.211.8460.73143 to 20841.60
18019,60078.417.3421.00197 to 30253.00
20026,000104.224.0141.24245 to 36862.30
22534,300137.232.1621.50342 to 49865.10
25048,000192.044.7671.78540 to 79768.50
30085,000340.079.0282.10976 to 1,45687.20

Time per 90° is the maximum, unloaded. Minimum pressure 5 to 10 bar; −25 to +70 °C, wider on request; mineral oil HLP, with HFC and HFD fluids on request. Sources: Eckart SM4 catalogue (production 02/2009) and product page. The product page quotes up to 250,000 Nm for the SM4; the catalogue sizes above run to 85,000 Nm, so ask us about larger sizes.

Options

Options and configurations

Options are added to the type code; leave them out for the standard version.

End cushioning (Z1)

Eckart end cushioning for a soft end of travel.

End stops (Z4)

A long-range adjustable end stop, beyond the standard ±5°.

Position sensing (Z5, Z6)

A cam, and mechanical or inductive control switches for angle feedback.

Shafts (ZW, ZN, SZ)

DIN 5480 gear shaft or gear hub, and a locating pin on the shaft end.

Special angles

Any intermediate rotation angle, including beyond 360°, and angle adjustment over the full range.

Special designs

A second drive pivot at the bottom, reversed rotation and direct valve connection.

Pressure and environment

Pressures above 250 bar, lake and salt water resistance, and special colours.

ATEX

ATEX certification for potentially explosive atmospheres.

Applications

Where SM4 actuators work

Machine building

Tool change, bending machines, workpiece positioning and changing

Valves

Gate valve control

Lifting and handling

Boom rotation, tipping devices

Process and transport

Opening and closing, rotational devices, transport

Running on 100 bar or less? The E1 is built for low-pressure hydraulics.

Downloads

Eckart SM4 downloads

Eckart’s own documents. No forms, no sign-up.

SM4 catalogue

Eckart GmbH · production 02/2009 · PDF

Download

SM4 size hazard analysis

Eckart GmbH · PDF

Download

Eckart company brochure

Eckart GmbH · PDF

Download

Sizing help

Not sure which size?

Send us the torque, pressure, rotation angle and load, and we will size the SM4 for you.

Replacing an actuator

Replacing an existing SM4

Every SM4 carries its type code on the type plate. Send us the full code and we will match the size, angle and options.

What to send us

The type code from the type plate, a photo of the actuator and its mounting, and what it moves.

Spares and repairs

Send us the type code and we will source genuine Eckart spare parts or arrange a repair. Call us and we will talk it through.

Model code

How to read an SM4 type code

  1. Model: SM4
  2. Size: the piston diameter, 40 to 300
  3. Rotation: 90°, 180°, 270°, 360° or the angle specified
  4. Options: such as SZ, Z1, Z4, Z5, Z6, ZW or ZN
  5. Non-standard: SO for special designs agreed with Eckart

Let’s find your actuator

Looking for an Eckart SM4 or a price?

We just need three details.

Replacing one? Send us the type code from the type plate and a photo, and we will work from those.

1

Torque

The torque needed, and at what pressure.

2

Motion

Rotation angle, plus stroke if it is rotary-linear.

3

Duty

Cycle time, environment, and any ATEX or SIL needs.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Eckart SM4 questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

How does the SM4 work?

Hydraulic pressure moves a piston between two end stops, and opposed helical gears turn that stroke into rotation of the drive shaft. Torque is the same in both directions.

Can the SM4 hold a load in position?

Yes. Solid seals prevent internal leakage, so the actuator holds a load at any intermediate position.

What rotation angles are available?

90°, 180°, 270° and 360° as standard, and any angle in between or beyond 360° to order.

Is there an ATEX version?

Yes, ATEX certification is one of the SM4 special designs, along with salt water resistance and pressures above 250 bar.

What colour are Eckart actuators?

Grey as standard. The photos on our site show them in red, and special colours are available on request.