Skip to main content

Home › Products › Staffa gearboxes

Staffa Gearboxes

Support for legacy Staffa G-range geared motors still in service.

Legacy range

The Staffa G range: support for units in service

The Staffa G range is six single-reduction epicyclic gearboxes, from the G008 to the G110, designed around Staffa motors. In their original data they give up to 150 kNm continuous torque, and many are still working on winches, mobile machines and industrial drives. We support them with servicing and repairs.

For a new drive, or to replace a worn-out geared motor, we recommend a Combination Drive: a Staffa motor and a Staffa brake with a modern planetary gearbox, in one package and with a much wider choice of ratios and torques.

Send us the gearbox and motor codes from the nameplates, and we will tell you whether it can be serviced, repaired or replaced.

Which route?

Existing gearbox or new drive?

  • A G-range gearbox already in service: servicing and repairs from us
  • A new drive, or a geared motor beyond repair: a Combination Drive
  • A brake to hold the load: Staffa brakes fit Staffa motors directly
  • Not sure? Send us the nameplate details

What we can do

Keeping Staffa geared motors running

Servicing and repairs

Servicing and repairs for G-range gearboxes, from the G008 to the G110, and the Staffa motors and brakes fitted to them.

Spares

Send us the nameplate details and we will check which spares are available.

A modern replacement

Where a unit is worn out, a Combination Drive replaces the motor, brake and gearbox as one package.

Legacy range

The G range at a glance

Six gearboxes, each built around a group of Staffa motors. Torques are for the strongest geared unit on each gearbox; the tables below give every unit.

GearboxRatioStaffa motorsGeared unitsMax. continuous torque (kNm)Max. peak torque (kNm)Brake module
G008Ask usB010, B030, B045; C010, C0305Ask usAsk usF025
G0206.64:1B045 to B100; C080527.136.6F090
G0307.38:1B060 to B270; C080 to C2701040.755.6M030
G0507.38:1B125 to B400; C200 to C325968.092.2M050
G0807:1B200 to B400; C200 to C3257108136M080
G1107:1B200 to B400; C200 to C3257150211.3M110

Torques are from the original Staffa brochures (Technical Bulletins T107, T112 and T113, December 1980, and T114, April 1981; G020 Range brochure, undated). Motors, unit counts and brake modules follow the later G-range designations. Later literature quotes lower continuous ratings for the gearboxes, so check a unit in service with us before relying on these figures.

Reference data

Geared unit data by gearbox

For identifying units in service. Open a gearbox to see each geared unit by its code in the original Staffa brochure and the later code, which combines the gearbox and motor (GB3200 is a G030 with a B200).

G008: the smallest gearbox

For B010, B030 and B045 motors and C010 and C030 dual displacement motors: later codes GB0810, GB0830, GB0845, GC0810 and GC0830. Performance data on request; send us the nameplate codes.

G020: 6.64:1, up to 27.1 kNm continuous

Staffa codeLater codeMotorMax. continuous torque (kNm)Max. peak torque (kNm)Max. speed (rpm)Approx. dry weight (kg)
GB0700GB2100B10027.136.637450 / 490
GB0590GB2080B08027.136.645440 / 480
GB0440GB2060B06019.828.145440 / 480
GB0310GB2045B04514.821.060416 / 456
GC0590GC2080C08027.136.639 / 90464 / 504

Weights are standard / braked. Source: Staffa G020 Range brochure (undated).

G030: 7.38:1, up to 40.7 kNm continuous

Staffa codeLater codeMotorMax. continuous torque (kNm)Max. peak torque (kNm)Max. speed (rpm)Approx. dry weight (kg)
GB1300GB3200B20040.755.624730 / 776
GB1050GB3150B15040.755.630730 / 776
GB0900GB3125B12540.755.630660 / 706
GB0750GB3100B10037.452.934590 / 636
GB0600GB3080B08030.643.340580 / 626
GB0450GB3060B06022.031.240580 / 626
GC1300GC3200C20040.755.617 / 53740 / 786
GC0600GC3080C08033.044.035 / 81600 / 646

Weights are standard / braked. Later literature also lists GB3270 (B270) and GC3270 (C270); ask us for their data. Source: Staffa G030 Range, Technical Bulletin T107, Issue 3, December 1980.

G050: 7.38:1, up to 68.0 kNm continuous

Staffa codeLater codeMotorMax. continuous torque (kNm)Max. peak torque (kNm)Max. speed (rpm)Approx. dry weight (kg)
GB2940GB5400B40068.092.213.51,343
GB2340GB5325B32568.092.213.51,296
GB1940GB5270B27068.092.2171,287
GB1310GB5200B20068.092.2241,150
GB1060GB5150B15056.880.5301,150
GB0910GB5125B12545.364.2301,084
GC1940GC5270C27068.092.216 / 471,317
GC1310GC5200C20068.092.217 / 531,149

Weights are for the standard unit. Later literature also lists GC5325 (C325); ask us for its data. Source: Staffa G050 Range, Technical Bulletin T112, Issue 2, December 1980.

G080: 7:1, up to 108 kNm continuous

Staffa codeLater codeMotorMax. continuous torque (kNm)Max. peak torque (kNm)Max. speed (rpm)Approx. dry weight (kg)
GB2950GB8400B400108136141,511
GB2350GB8325B325108136141,464
GB1950GB8270B27094.4133.7181,455
GB1350GB8200B20067.295.2251,318
GC1950GC8270C270100.3133.817 / 501,485
GC1350GC8200C20066.688.818 / 561,317

Weights are for the standard unit. Later literature also lists GC8325 (C325); ask us for its data. Source: Staffa G080 Range, Technical Bulletin T113, Issue 2, December 1980.

G110: 7:1, up to 150 kNm continuous

Staffa codeLater codeMotorMax. continuous torque (kNm)Max. peak torque (kNm)Max. speed (rpm)Approx. dry weight (kg)
GB3000GB11400B400150211.3141,620
GB2400GB11325B325116164.7141,573
GB2000GB11270B27094.4133.7181,564
GB1390GB11200B20067.295.2251,427
GC2000GC11270C270100.3133.817 / 501,594
GC1390GC11200C20066.688.818 / 561,426

Weights are for the standard unit. Later literature also lists GC11325 (C325); ask us for its data. Source: Staffa G110 Range, Technical Bulletin T114, Issue 4, April 1981.

GB units have a fixed displacement B motor; GC units have a dual displacement C motor, so they have two maximum speeds. A D after the G marks a braked unit (GDB, GDC). Figures are the kNm columns as printed in the original brochures; for a unit in service, ask us.

Data and drawings

Original G-range data

The original brochures for the G020, G030, G050, G080 and G110, with installation drawings, rating envelopes and life charts, are available on request. They are archive documents, so check current details with us.

G-range brochures

Original Staffa data and drawings · on request

Ask us

Combination Drive

The modern route for new geared drives · web page

View

Quick answer

Got a gearbox in front of you?

Send us the codes from the gearbox and motor nameplates, and a photo, and we will tell you what it needs.

Servicing a gearbox

Servicing or replacing a Staffa gearbox

The nameplate codes tell us the gearbox, motor and brake. Send them with a photo and a note of what the drive is doing.

Service and repair

We service and repair Staffa geared motors and check which spares are available. Call us and we will talk it through.

Replacing a unit

Where a geared motor is beyond economic repair, a Combination Drive gives a modern replacement with a Staffa motor and brake.

Checklist

What we need from the nameplates

  1. Geared unit: GB or GC and its number: an original code such as GB1300, or a later one such as GB3200
  2. Motor: the Staffa motor code, such as B200 or C270; the two code systems overlap, so we need both
  3. Brake: whether one is fitted (a D after the G, as in GDB or GDC, marks a braked unit)
  4. Duty: what the drive does, and any symptoms

Let’s keep it running

Servicing a Staffa gearbox?

We just need three details.

Planning a new drive? Ask us about a Combination Drive instead.

1

Nameplates

The gearbox and motor codes.

2

Photo

Of the unit and its nameplates.

3

The job

What the drive does, and what it is doing now.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Staffa gearbox questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

Which Staffa gearboxes do you support?

The G range: the G008, G020, G030, G050, G080 and G110, and the Staffa motors and brakes fitted to them. Send us the nameplate codes to start.

What torque do the G-range gearboxes give?

In the original Staffa data, up to 150 kNm continuous on a G110 with a B400 motor, with peaks up to 211 kNm; the G020 units start at 14.8 kNm. Later literature quotes lower continuous ratings, so check a unit in service with us.

What should I use for a new geared drive?

A Combination Drive: a Staffa motor and a Staffa brake with a modern planetary gearbox, in one package, with a much wider choice of ratios and torques than the G range.

How do I identify my gearbox?

From the nameplate codes. GB units carry a fixed displacement motor and GC units a dual displacement one, and a D (GDB, GDC) marks a braked unit. Older units carry the original Staffa number, such as GB1300; later ones combine the gearbox and motor, such as GB3200. Send us the motor code too, and the tables above will match it.

Can I get the original data sheets?

Yes, on request, for the G020, G030, G050, G080 and G110. They are archive documents from the original Staffa range, so check current details with us.