Home › Products › Staffa motors › HMB
Staffa HMB Radial Piston Motor
Fixed displacement. High torque at low speed.
Home › Products › Staffa motors › HMB
Fixed displacement. High torque at low speed.
From 188 to 8,000 cc/rev and up to 25,250 Nm. Genuine Kawasaki Staffa motors and spares, supplied and supported from Silsden, West Yorkshire.

8,000cc/rev
DisplacementFrom 188 cc/rev on the smallest frame.
25,250Nm
Output torqueHMHDB400 at 250 bar continuous.
250bar
Continuous pressureUp to 300 bar intermittent.
190kW
Continuous powerFrom the HMHDB400 frame.
Overview
The Staffa HMB motor is Kawasaki’s fixed displacement radial piston motor. It gives high torque from a standstill and smooth running at low speed, and for many slow, heavy duties one displacement is all the machine needs.
Frame sizes run from HMB030 to HMB500, covering 188 to 8,000 cc/rev and running torques from 2.30 to 114 Nm/bar. Heavy duty HMHDB versions are available on the larger frames, and a wide choice of shafts, ports and mountings, including mountings to suit most existing interfaces, makes an HMB straightforward to fit.
We are a UK distributor for Kawasaki Precision Machinery, supplying HMB motors and genuine KPM spares, and we make the Staffa brakes that fit them.
Which Staffa motor?
Key advantages
Good breakout torque and smooth running, with an increased starting torque option for duties below about 10 rpm or with frequent starts and reversals.
Hydrostatic balancing reduces wear and extends service life.
High volumetric and mechanical efficiency across the range.
A wide range of shafts, ports and mounting interfaces, with mountings to suit most existing interfaces on request.
Phosphate ester (HFD) and water-based fluids (HFA, HFB and HFC), as well as mineral oil.
Marine paint and cylinder heads, improved shaft seal life, thermal shock resistance. ATEX enquiries are subject to confirmation of the current motor specification and documentation by Kawasaki Precision Machinery.
Technical data
Running torque is the average actual running torque per bar. Use the pressure difference across the motor for a preliminary torque estimate, then check the manufacturer’s performance curves for the operating speed, fluid and return pressure. Frame codes are written as they appear on the nameplate.
| Frame code | Displacement (cc/rev) | Running torque (Nm/bar) | Continuous pressure (bar) | Intermittent pressure (bar) | Continuous speed (rpm) | Continuous power (kW) |
|---|---|---|---|---|---|---|
| HMB030Replaces HMB010 | 188 | 2.30 | 207 | 250 | 500 | 18 |
| HMB030 | 442 | 6.56 | 207 | 250 | 450 | 42 |
| HMB030FM3 housing | 492 | 7.31 | 207 | 250 | 450 | 52 |
| HMB045 | 740 | 10.95 | 250 | 300 | 400 | 60 |
| HMB060 | 983 | 14.5 | 250 | 300 | 300 | 80 |
| HMB080 | 1,344 | 19.9 | 250 | 300 | 300 | 100 |
| HMB100 | 1,639 | 24.3 | 250 | 293 | 250 | 110 |
| HMB125, HMHDB125 | 2,050 | 30.66 | 250 | 300 | 220 | 100 |
| HMB150, HMHDB150 | 2,470 | 36.95 | 250 | 300 | 220 | 115 |
| HMB150FM3 housing | 2,470 | 36.95 | 250 | 300 | 168 | 115 |
| HMB200, HMHDB200 | 3,087 | 46.07 | 250 | 300 | 175 | 130 |
| HMB200FM3 housing | 3,087 | 46.07 | 250 | 300 | 135 | 130 |
| HMB270, HMHDB270 | 4,310 | 63.79 | 250 | 300 | 125 | 140 |
| HMB325, HMHDB325 | 5,310 | 79.4 | 250 | 300 | 100 | 140 |
| HMHDB400 | 6,800 | 101 | 250 | 300 | 120 | 190 |
| HMB500 | 8,000 | 114 | 190 | 227 | 100 | 170 |
Continuous duty means working within every maximum for speed, pressure and power at the same time. For intermittent maximum pressure, the limit is 15% duty for periods of up to 5 minutes at speeds up to 50 rpm. Above 50 rpm, the limit is 2% duty for periods of up to 30 seconds. The pressure limit for the selected frame still applies. Source: KPM UK datasheet M200112.24-HMB, revised December 2024, which also gives volumetric data, stress limits and bearing life.
Applications
Deck and mooring winches, deck cranes, ROV launch systems, pipe handling
Shredders and waste treatment plant
Crushers and conveyors
Injection moulding screw drives, die casting machines
Can’t find it?
Send us the model code from the nameplate and we will find the right drawing, CAD model or spares list.
Replacing a motor
Every HMB carries its model code on the nameplate. Send us the full code and we will match the frame, shaft, ports and options, or tell you what has replaced them.
The HMB010 is replaced by the 188 cc/rev HMB030. KPM’s December 2024 datasheet replaces the F3, FM3, F4 and FM4 valve housings with SM and SFM housings; if your motor has one of the older housings, send us the code and we will confirm the match.
The full model code, a photo of the nameplate, photos of the shaft and port face, and what the motor drives.
We supply genuine KPM spares for HMB motors. Quote the model code, or the part number from the spares drawing for your frame. Need a repair rather than a replacement? Call us and we will talk it through.
Model code
Let’s find your motor
We just need three details.
Replacing an HMB? Send us the model code from the nameplate and a photo, and we will work from those.
1
Continuous and peak, at the motor shaft.
2
Shaft rpm, and the range if it varies.
3
Hours per day, starts per hour and direction changes.
Prefer us to call you? Request a callback.
FAQs
Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.
HMHDB is the heavy duty version. It is offered on the 125, 150, 200, 270 and 325 frames, with its own shaft options (P2, S5 and Z5), and the 400 frame comes in heavy duty form only.
The HMB030 at 188 cc/rev, rated 207 bar continuous and 500 rpm. Send us the code from your HMB010 nameplate and we will confirm the match.
Yes, with both ports connected and the circuit boosted, but it needs large recirculating flows and careful attention to cooling. KPM recommends the HMC, HPC or HMF for freewheeling duties.
Mineral oil as standard. Phosphate ester (HFD) with the F3 prefix, and water-based fluids (HFA, HFB and HFC) with the F11 prefix.
ATEX enquiries are subject to manufacturer confirmation. Send us the application requirements and we will ask Kawasaki Precision Machinery to confirm the current specification, documentation, permitted options and installation requirements for the selected HMB motor.