Skip to main content

Home › Products › Eckart actuators › 2AxA and 3AxA

Eckart Multi-Axis Actuators

The 2AxA and 3AxA move and hold heavy loads in two or three axes.

Up to 49,000 Nm on the 2AxA’s main axis, and three axes on the 3AxA. Supplied and supported in the UK from Silsden, West Yorkshire.

Get a priceSend us your load details
Eckart 3AxA three-axis and 2AxA two-axis hydraulic actuators

49,000Nm

Torque2AxA axis 2 at 210 bar; axis 1 gives 11,000 Nm.

65,000Nm

Holding torque2AxA axis 2 at 190 bar.

250bar

Operating pressure2AxA, with peaks to 285 bar.

3axes

On the 3AxAX, Y and Z, configured to the job.

Overview

Eckart multi-axis actuators: heavy loads, more than one axis

The 2AxA and 3AxA build Eckart’s helical rotary actuators into one unit that moves and holds heavy loads in more than one axis. Both work hydraulically, and both are adapted to the job they do.

The 2AxA moves a load in two axes, in the X and Y planes or others. Its first axis gives up to 11,000 Nm and its second up to 49,000 Nm at 210 bar, with holding torques of 16,000 and 65,000 Nm. The 3AxA adds a third axis for movement in X, Y and Z, and is specified for each application.

We supply Eckart’s hydraulic range in the UK, with help choosing the right size and support from Silsden. Our photos show the actuators in red; they are supplied grey as standard, and special colours are available.

2AxA or 3AxA?

Start with the axes you need

  • Two axes, with published torques and loads: the 2AxA
  • Three axes, X, Y and Z, built to the application: the 3AxA
  • One axis of rotation under heavy load: the SM4
  • Valves rather than loads: HyRAV Flex

Key advantages

Why choose an Eckart multi-axis actuator

Moves and holds

Moves heavy loads precisely and holds them in position, axis by axis.

One unit

Two or three axes of movement from a single hydraulic actuator.

High holding torque

Up to 65,000 Nm of holding torque on the 2AxA’s second axis.

Takes heavy loads

Radial forces up to 66,000 N and bending moments up to 110,000 Nm on the 2AxA.

Protected

Peak pressure of 285 bar, secured by a pressure relief valve.

Adapted to the job

Configured for the application, for any installation position.

Technical data

Eckart 2AxA technical specifications

Figures for each axis of the 2AxA. The 3AxA is specified for each application.

2AxAAxis 1Axis 2
Max. torque at 210 bar11,000 Nm49,000 Nm
Max. holding torque16,000 Nm at 210 bar65,000 Nm at 190 bar
Rotation180°, and any angle between365° (+2°), and any angle between
Absorption (cm³ per °)12.9372.64
Max. operating pressure250 bar250 bar
Max. peak pressure285 bar, relief valve285 bar, relief valve
Radial force18,500 N66,000 N
Axial force35,000 N60,000 N
Bending moment9,500 Nm110,000 Nm
Weight364 kg650 kg

Minimum pressure 10 bar; −25 to +70 °C, wider on request; hydraulic fluids to DIN 51524 or ISO 11158, with HFC and HFD fluids on request; any installation position. Source: Eckart 2AxA product page.

Applications

Where multi-axis actuators work

Marine and offshore

Suction dredgers and special vessels for wind farms, platforms and harbours; shipbuilding

Mining

Positioning booms on drilling vehicles and scrapers

Cranes and construction

Heavy-duty and construction cranes, bridge construction

Oil and gas

Moving heavy equipment on offshore drilling platforms

Industry and logistics

Industrial manipulators and robotics, heavy plant, warehouse automation

Test and entertainment

Energy and aerospace test rigs, simulation, stage and event technology

Downloads

Multi-axis downloads

Eckart publishes no catalogue for the 2AxA or 3AxA. We can get drawings and data for your application.

Drawings and data

For your load and axes, on request

Ask us

Eckart company brochure

Eckart GmbH · PDF

Download

Sizing help

Two axes or three?

Send us the load, the torque and angle on each axis, and the environment, and we will take it from there.

Specifying

Specifying a multi-axis actuator

Each multi-axis actuator is matched to its job. Send us the details below and we will work through it with Eckart.

Replacing an existing unit?

Send us the type plate details and photos of the actuator and its mounting, and we will match it.

Spares and repairs

Send us the type code and we will source genuine Eckart spare parts or arrange a repair. Call us and we will talk it through.

Checklist

What we need to specify a 2AxA or 3AxA

  1. Axes: two or three, and the planes they move in
  2. Load: mass, torque and holding torque on each axis
  3. Angles: the rotation needed on each axis
  4. Forces: radial and axial forces and bending moment at the mounting
  5. Site: hydraulic pressure, temperature and environment, such as offshore

Let’s find your actuator

Looking for an Eckart multi-axis actuator or a price?

We just need three details.

Replacing one? Send us the type code from the type plate and a photo, and we will work from those.

1

Torque

The torque needed, and at what pressure.

2

Motion

Rotation angle, plus stroke if it is rotary-linear.

3

Duty

Cycle time, environment, and any ATEX or SIL needs.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Eckart multi-axis questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

What is the difference between the 2AxA and 3AxA?

The 2AxA moves and holds a load in two axes. The 3AxA adds a third, for movement in the X, Y and Z planes.

Is the 3AxA a standard product?

It is configured for each application, and Eckart notes that the unit shown is an example. Send us the loads and axes and we will work through the specification with Eckart.

How much can the 2AxA hold?

Up to 16,000 Nm on axis 1 at 210 bar, and up to 65,000 Nm on axis 2 at 190 bar.

What pressure does the 2AxA need?

Up to 250 bar, with a minimum of 10 bar. Peaks to 285 bar are secured by a pressure relief valve.

What colour are Eckart actuators?

Grey as standard. The photos on our site show them in red, and special colours are available on request.