Home › Products › Eckart actuators › HyRAV Flex
Eckart HyRAV Flex Valve Actuator
Quarter-turn hydraulic valve actuators, 500 to 250,000 Nm.
Home › Products › Eckart actuators › HyRAV Flex
Quarter-turn hydraulic valve actuators, 500 to 250,000 Nm.
Double acting or spring return, ATEX and SIL2 certified, with an EN ISO 5211 valve flange. Supplied and supported in the UK from Silsden, West Yorkshire.

15sizes
Actuator sizesAS000 to AS250.
250,000Nm
Maximum torqueAS250; the AS000 gives 500 Nm.
0.2s
Fail-safe stroke90° in as little as 0.2 seconds, by size.
SIL2
CertifiedAlso ATEX, with further approvals in progress.
Overview
HyRAV Flex is Eckart’s range of hydraulic quarter-turn valve actuators. Combined helical gears turn hydraulic pressure into a 90° rotation, and the concentric design keeps radial forces off the valve. Solid seals mean no internal leakage, so the actuator holds any intermediate position.
Fifteen sizes run from 500 to 250,000 Nm, double acting or single acting with a spring return for fail-safe opening or closing. Each mounts to the valve through an EN ISO 5211 flange, on a hollow shaft with feather keys or a square drive, and the range is certified to ATEX and SIL2.
We supply Eckart’s hydraulic range in the UK, with help choosing the right size and support from Silsden. Our photos show the actuators in red; they are supplied grey as standard, and special colours are available.
Double or single acting?
Key advantages
A concentric design keeps radial forces off the valve, with low-friction seals and optimised cushioning.
Solid seals and no internal leakage, so the valve stays where it is set.
Spring return versions trip from 0.2 seconds per 90°, depending on size.
Positioning accuracy better than 0.5° of full scale, measured directly through the through shaft.
Maintenance-free with no lubrication needed, and wear-resistant nitrided moving parts.
IP65, from −25 to +70 °C, robust against vibration, ATEX and SIL2 certified.
Technical data
Standard torque by size; torques can be adapted to the valve. Each size mounts to the flange shown and to the neighbouring flange sizes.
| Type | Standard torque (Nm) | Flange (EN ISO 5211) | Valve flanges | Hollow shaft bore, max. (mm) | Square, max. (mm) |
|---|---|---|---|---|---|
| AS000 | 500 | F10 | F07, F10, F12 | 28 | 22 |
| AS001 | 1,000 | F12 | F10, F12, F14 | 36 | 27 |
| AS002 | 2,000 | F14 | F12, F14, F16 | 48 | 36 |
| AS004 | 4,000 | F16 | F14, F16, F25 | 60 | 46 |
| AS006 | 6,000 | F25 | F16, F25, F30 | 72 | 55 |
| AS008 | 8,000 | F25 | F16, F25, F30 | 72 | 55 |
| AS012 | On request | F30 | F25, F30, F35 | 85 | 70 |
| AS016 | 16,000 | F30 | F25, F30, F35 | 98 | 75 |
| AS024 | 24,000 | F35 | F30, F35, F40 | 115 | 100 |
| AS032 | 32,000 | F35 | F30, F35, F40 | 130 | 115 |
| AS063 | 63,000 | F40 | F35, F40, F48 | 165 | 130 |
| AS100 | 100,000 | F48 | F40, F48 | 200 | 165 |
| AS125 | 125,000 | F48 | F40, F48 | 220 | 180 |
| AS185 | 185,000 | F60 | F48, F60 | 250 | 200 |
| AS250 | 250,000 | F60 | F48, F60 | 280 | 220 |
Maximum pressure 210 bar; minimum 5 to 10 bar, and economical from 20 bar. Quarter turn, 90°. Operating time 0.5 to 200 seconds, or from 0.2 seconds fail-safe. Duty S1, 100%. IP65, −25 to +70 °C, mineral oil HLP to DIN 51524. Source: Eckart HyRAV Flex brochure, which also gives weights by size.
Applications
Coal, gas, oil and nuclear plant; hydroelectric, geothermal, solar thermal and biogas
Exploration and offshore, refineries, pipelines and tank farms
Water treatment, sewage treatment and drinking water distribution
Ships and submarines
Chemical and pharmaceutical, food, air conditioning
Steel mills and steel hydraulic structures
Sizing help
Send us the valve type, size and torque, and whether it must fail safe, and we will size the actuator.
Specifying
Most of the choice comes from the valve. Send us its details and the duty, and we will match the size, flange, drive and options.
Send us the type plate details and photos of the actuator and valve, and we will match it, whatever make it is.
Send us the type code and we will source genuine Eckart spare parts or arrange a repair. Call us and we will talk it through.
Checklist
Let’s find your actuator
We just need three details.
Replacing one? Send us the type code from the type plate and a photo, and we will work from those.
1
The torque needed, and at what pressure.
2
Rotation angle, plus stroke if it is rotary-linear.
3
Cycle time, environment, and any ATEX or SIL needs.
Prefer us to call you? Request a callback.
FAQs
Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.
Quarter-turn valves, including butterfly and ball valves, mounted through an EN ISO 5211 flange with a hollow shaft and feather keys or a square drive.
The single-acting versions are. A spring package returns the valve to open or closed when pressure is lost, in as little as 0.2 seconds per 90° depending on size. Double-acting versions are also available.
ATEX and SIL2, with further approvals in progress, and quality assurance to DIN EN ISO 9001.
Up to 210 bar, with a minimum of 5 to 10 bar; it is economical from 20 bar.
Grey as standard. The photos on our site show them in red, and special colours are available on request.