Skip to main content

Home › Products › Staffa motors › HMF

Staffa HMF Three-Speed Motor

Three displacements, changed on the run.

Four frames from 1,600 to 5,326 cc/rev, with a freewheel in zero displacement. Genuine Kawasaki Staffa motors and spares, supplied and supported from Silsden, West Yorkshire.

Get a priceSend us your model code
Staffa HMF three displacement radial piston hydraulic motor

3speeds

DisplacementsHigh, medium and low, changed on the run.

5,326cc/rev

Largest displacementHMF325; the HMF100 reaches 1,600 cc/rev.

278kW

High power optionHMF270 and HMF325, with crankcase flushing.

1,500rpm

Freewheel speedIn zero displacement, with crankcase flushing.

Overview

The Staffa HMF motor: three displacements from one motor

The Staffa HMF is Kawasaki’s three-speed radial piston motor. It runs at high, medium and low preset displacements, chosen hydraulically while the motor turns, so one motor can cover three distinct duties.

Four frames run from HMF100 to HMF325, with maximum displacements from 1,600 to 5,326 cc/rev, and heavy duty HMHDF versions on the 200, 270 and 325 frames. The motor starts in high displacement and moves to medium or low from high, and a zero displacement setting lets it freewheel at up to 1,500 rpm.

We are a UK distributor for Kawasaki Precision Machinery, supplying HMF motors and genuine KPM spares, and we make the Staffa brakes designed for Staffa motors.

Which Staffa motor?

Choose the HMF when two speeds are not enough

Key advantages

Why choose a Staffa HMF

Three speeds, one motor

High, medium and low displacements, changed while the motor turns.

A wide choice of settings

Choose the three displacements from each frame’s full range of codes, down to zero.

High power option

Up to 278 kW continuous with crankcase flushing, at the same speed and pressure limits.

Freewheel option

Zero displacement for freewheeling at up to 1,500 rpm.

Returns to full torque

If control pressure is lost, the motor shifts to its highest displacement.

Built for hard places

Marine paint and cylinder heads, improved shaft seal life, thermal shock resistance and 405 bar static pressure to DNV rules. ATEX enquiries are subject to confirmation of the current motor specification and documentation by Kawasaki Precision Machinery.

Technical data

Staffa HMF technical specifications

Each frame offers displacement codes from its maximum down to zero, and the motor runs on any three, set in the model code. Figures are at the maximum displacement. Where two figures are shown, the first is with SM3, F3 or FM3 housings and the second with F4 or FM4.

Frame codeMax. displacement (cc/rev)Running torque (Nm/bar)Continuous speed (rpm)Continuous power (kW)High power option (kW)Medium above low by (cc/rev)
HMF1001,60023.9270 / 365138165655
HMF200Also HMHDF2003,08746.6175 / 230174216 / 2611,230
HMF270Also HMHDF2704,58869.41501892781,720
HMF325Also HMHDF3255,32680.41301892781,720

Continuous pressure is 250 bar and intermittent 300 bar. The medium displacement must sit above the low by at least the figure shown. The high power option needs 15 l/min of crankcase flushing; speed and pressure limits stay the same. Source: KPM UK HMF datasheet (file M-200512.17-HMF), which lists every displacement code with its torque, speed and power.

Options

Options and configurations

Every option is set in the model code, so a replacement motor can be matched exactly.

Shafts

P, S, Z and T on the HMF100; P1, S3, S4, Z3 and T on the 200; P1, S3, Z4 and T on the 270 and 325. Heavy duty HMHDF frames take P2, S5 and Z5 shafts.

Main ports

SM3, F3, FM3, F4 or FM4 on the 100 and 200 frames, and F4 or FM4 1½” SAE code 62 flanges on the 270 and 325.

Displacement control

Three pilot ports, X, Y and Z, select low, high and medium. The control system must move to low or medium only from high.

Speed sensing

Tj: a dual-channel Hall effect sensor giving speed and direction, 16 pulses per revolution, sealed to IP68 and powered from 8 to 32 V. Tk adds a T401 module with a tacho, a relay and a 0/4 to 20 mA output.

Seals

A high pressure shaft seal, rated 10 bar continuous case pressure, for cold climates, and a stainless steel shaft sleeve for corrosive conditions.

Paint and cylinder heads

Marine primer paint, marine-style cylinder heads that shed water, and marine paint finishes.

Performance options

Increased starting torque, anti-clockwise rotation, improved cavitation resistance for overrunning loads, and thermal shock resistance for cold starts.

High power

Crankcase flushing at 15 l/min raises continuous power and gives a 100 bar back pressure rating.

Applications

Where HMF motors work

Marine and offshore

Deck and mooring winches, deck cranes, ROV launch systems, pipe handling

Recycling and waste

Shredders and waste treatment plant

Quarrying and mining

Crushers and conveyors

Plastics and die casting

Injection moulding screw drives, die casting machines

Tunnelling

Tunnel boring machines

Need more than about 25 kNm? A Combination Drive adds a planetary gearbox to a Staffa motor and brake.

Downloads

Staffa HMF downloads

Current documents from Kawasaki Precision Machinery (UK). No forms, no sign-up.

Staffa HMF datasheet

M-200512.17-HMF · PDF

Download

Staffa ATEX reference — confirm current documentation

M-10.18 · HMB, HPB, HMC, HPC and HMF · PDF

Download

3D CAD models

By model code, HMF100 to HMF325

View

Installation and spares drawings

For your frame, on request

Ask us

Can’t find it?

Need the drawing for your exact motor?

Send us the model code from the nameplate and we will find the right drawing, CAD model or spares list.

Replacing a motor

Replacing an existing HMF motor

Every HMF carries its model code on the nameplate. Send us the full code and we will match the frame, all three displacements and the options, or tell you what has replaced them.

Three displacement codes

An HMF model code carries high, medium and low displacement codes, such as 280/140/00. Send us the whole code so we match all three.

What to send us

The full model code, a photo of the nameplate, photos of the shaft and port face, and what the motor drives.

Spares and repairs

We supply genuine KPM spares for HMF motors. Quote the model code, or the part number from the spares drawing. Need a repair rather than a replacement? Call us and we will talk it through.

Model code

How to read an HMF model code

  1. Fluid: blank for mineral oil, F3 for phosphate ester, F11 for water-based fluids
  2. Model: HM, or HMHD for heavy duty
  3. Frame size: F100, F200, F270 or F325
  4. Shaft type: such as S3 or P1, plus V for vertically up
  5. Displacements: high, medium and low, such as 280/140/00
  6. Main ports: such as FM4
  7. Control ports: X, Y and Z
  8. Speed sensor: blank, Tj or Tk
  9. Design series and features: the current series, then a P code for catalogued options or PL for special ones

Let’s find your motor

Looking for an HMF motor or a price?

We just need three details.

Replacing one? Send us the model code from the nameplate and a photo, and we will work from those.

1

Torque

Continuous and peak, at the motor shaft.

2

Speed

Shaft rpm, and the range if it varies.

3

Duty

Hours per day, starts per hour and direction changes.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Staffa HMF questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

How does an HMF change between three displacements?

Pilot pressure on port Y selects high and on port X selects low; medium is reached from high through a short sequence on ports Y and Z, then X. The motor moves to low or medium only from high, and the control system must make sure of that.

Can an HMF freewheel?

Yes. With zero displacement selected, the ports connected and the circuit boosted, it freewheels at up to 1,500 rpm. Between 1,000 and 1,500 rpm it needs up to 15 l/min of crankcase flushing.

What is the high power option?

Crankcase flushing at 15 l/min raises continuous power, to 278 kW on the HMF270 and HMF325, with the same speed and pressure limits, and gives a 100 bar back pressure rating.

What is HMHDF?

The heavy duty HMF, with stronger P2, S5 and Z5 shafts, on the 200, 270 and 325 frames.

Which fluids can an HMF run on?

Mineral oil as standard. Phosphate ester (HFD) runs with the F3 prefix at the full 250 bar continuous. Water-based fluids (HFA, HFB and HFC) run with the F11 prefix at 103 to 138 bar continuous depending on type, and HFA and HFC at half the mineral oil speed limits.