Skip to main content

Home › Products › Kawasaki pumps › K8V

Kawasaki K8V Closed Circuit Pump

Variable displacement pump for closed loop drives, 420 bar rated.

Three sizes from 71 to 130 cc/rev, for hydrostatic transmissions on mobile machines. Supplied and supported in the UK from Silsden, West Yorkshire.

Get a priceSend us your model code
Kawasaki K8V closed circuit axial piston pump

130cc/rev

Largest sizeK8V125; the K8V71 gives 71 cc/rev.

420bar

Rated pressure500 bar peak.

3,300rpm

Maximum speedK8V71; 2,850 rpm for the K8V125.

Overview

The Kawasaki K8V: a closed loop pump for hydrostatic drives

The K8V is a variable displacement swash plate pump for closed loop systems, the pump side of a hydrostatic transmission. Flow is set by mechanical feedback of the swash plate position, for precise control, and Kawasaki’s efficiency and noise reduction work gives high efficiency and low noise.

Three sizes give 71, 90 and 130 cc/rev at 420 bar rated and 500 bar peak. A charge pump, high and low pressure relief valves and a cut-off valve are standard options. Pair it with an M7V motor for a complete Kawasaki drive.

We are a UK distributor for Kawasaki Precision Machinery, supplying Kawasaki pumps and motors and genuine KPM spares, with help choosing the right unit and support from Silsden.

Which Kawasaki pump?

Start with the circuit and the pressure

  • Open circuit, 320 bar, 28 to 200 cc: the K3VL
  • Compact load-sensing mobile pump, 280 bar: the K3VLS
  • Heavy industrial duty, 350 bar: the K7VG
  • Closed circuit drive: the K8V with an M7V motor
  • Replacing a pump? Send us the model code from the nameplate

Key advantages

Why choose the Kawasaki K8V

Efficient and quiet

Top-level pump efficiency and low noise from Kawasaki’s design work.

Precise flow control

Mechanical feedback of the swash plate position sets the flow.

High pressure, long life

High reliability and long life at 420 bar rated pressure.

Valves to hand

Charge pump, high and low pressure relief and cut-off valves as standard options.

Your choice of control

Electric proportional, hydraulic pilot or manual displacement control.

A complete drive

Pairs with the Kawasaki M7V variable motor for a hydrostatic transmission.

Technical data

Kawasaki K8V technical specifications

Rated at 420 bar with 500 bar peaks.

SizeDisplacement (cc/rev)Rated pressure (bar)Peak pressure (bar)Max. speed (rpm)Weight, approx. (kg)
K8V71714205003,30060
K8V90904205003,05075
K8V1251304205002,85095

Source: Kawasaki K8V product page, pressures converted from MPa. Kawasaki publishes no K8V datasheet in the UK, so ask us for drawings, control curves and the model code for your application.

Options

Controls and options

The K8V is configured for the transmission it drives.

Electric proportional

Electric proportional displacement control.

Hydraulic pilot

Hydraulic pilot displacement control.

Manual

Manual displacement control.

Charge pump and valves

Charge pump, high and low pressure relief valves and a cut-off valve.

Applications

Where K8V pumps work

Construction

Wheel loaders, dozers, backhoe and track loaders, dump trucks

Quarrying and road building

Crushers, compactors and asphalt pavers

Materials handling

Forklift trucks and telehandlers

Agriculture and forestry

Combine harvesters, sprayers and forestry equipment

Open circuit? The K3VL and K3VLS are open circuit pumps.

Downloads

Kawasaki K8V information

There is no K8V datasheet for the UK. We can get drawings and data for your application.

Drawings and data

For your size and controls, on request

Ask us

K8V product page

Kawasaki Heavy Industries · web page

View

Sizing help

Not sure which size?

Send us the flow, pressure, drive speed and control you need, and we will size the K8V for you.

Replacing a pump

Replacing an existing K8V

Every K8V carries its model code on the nameplate. Send it to us and we will match the size, controls and valves, or source genuine spares.

What to send us

The full model code from the nameplate, and photos of the nameplate, shaft and regulator. The code covers the size, controls, mounting and shaft.

Genuine KPM spares

Send us the model code and we will source genuine KPM spare parts, or a replacement unit. Call us and we will talk it through.

Checklist

What we need to match a K8V

  1. Model code: the full code from the nameplate
  2. Size: K8V71, K8V90 or K8V125
  3. Control: electric proportional, hydraulic pilot or manual
  4. Valves: charge pump, relief and cut-off valve settings
  5. Machine: what it drives, and the motor it is paired with

Let’s find your pump

Looking for a Kawasaki K8V pump or a price?

We just need three details.

Replacing one? Send us the model code from the nameplate and a photo, and we will work from those.

1

Flow

Displacement, or the flow you need at your drive speed.

2

Pressure

Working and peak pressure.

3

Control

Load sense, pressure cut-off, torque limit or electric.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Kawasaki K8V questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

What is the K8V used for?

Closed loop hydrostatic transmissions on mobile machines, such as wheel loaders, dozers, forklift trucks, telehandlers, compactors and combine harvesters.

Which motor goes with a K8V?

The Kawasaki M7V variable displacement motor runs in closed circuits and pairs with the K8V for a complete Kawasaki drive.

What pressure is the K8V rated for?

420 bar rated and 500 bar peak.

Is there a K8V datasheet?

Not for the UK. Ask us and we will get drawings, control curves and data for your application.

Why is the K8V125 130 cc/rev?

That is the displacement Kawasaki gives for the K8V125. The model name and the displacement simply differ.