Skip to main content

Home › Products › Kawasaki pumps › K7VG

Kawasaki K7VG Axial Piston Pump

High-pressure open circuit pump for industrial machinery, 350 bar rated.

Two sizes, 180 and 270 cc/rev, with an ISO mount and shaft and optional through drives. Supplied and supported in the UK from Silsden, West Yorkshire.

Get a priceSend us your model code
Kawasaki

270cc/rev

DisplacementK7VG265; the K7VG180 gives 180 cc/rev.

350bar

Rated pressure400 bar peak, on mineral oil or polyol ester.

299kW

Maximum input powerK7VG265; 231 kW for the K7VG180.

210bar

On water glycolWith the water glycol version.

Overview

The Kawasaki K7VG: high pressure for industrial machinery

The K7VG is a variable displacement swash plate pump for open circuits, developed for general industrial machinery. It is rated at 350 bar with 400 bar peaks, with high-load bearings for long life and a semi-cylindrical swash plate and anti-vibration support for low noise.

Two sizes give 180 and 270 cc/rev on an ISO mount and shaft. Controls combine torque limiting, pressure cut-off, remote pressure control, load sensing and negative, positive or electric flow control, and versions run on polyol ester or water glycol where the fluid must resist fire.

We are a UK distributor for Kawasaki Precision Machinery, supplying Kawasaki pumps and motors and genuine KPM spares, with help choosing the right unit and support from Silsden.

Which Kawasaki pump?

Start with the circuit and the pressure

  • Open circuit, 320 bar, 28 to 200 cc: the K3VL
  • Compact load-sensing mobile pump, 280 bar: the K3VLS
  • Heavy industrial duty, 350 bar: the K7VG
  • Closed circuit drive: the K8V with an M7V motor
  • Replacing a pump? Send us the model code from the nameplate

Key advantages

Why choose the Kawasaki K7VG

350 bar rated

Designed for high-pressure hydraulic systems, with 400 bar peaks.

Long bearing life

High-load bearings and shoe contact mechanisms reduce wear.

Efficient, self-priming

A spherical valve plate keeps efficiency up at low pressure and speed, and primes fast.

Low noise

A compact housing, semi-cylindrical swash plate and anti-vibration support cut noise and pulsation.

Responsive controls

Flow, pressure and power controls, and combinations of them.

Through drive

An SAE through drive takes an auxiliary pump, which can save a separate control or boost pump.

Technical data

Kawasaki K7VG technical specifications

Both sizes are rated at 350 bar and 400 bar peak on mineral oil.

SizeDisplacement (cc/rev)Self-priming speed (rpm)Max. speed, boosted (rpm)Max. input torque (Nm)Max. input power (kW)Weight (kg)
K7VG1801801,8002,2001,003231145
K7VG2652701,500 (H: 1,600)1,500 (H: 1,900)1,504299225

H is the high-speed version. Case pressure 1 bar continuous, 4 bar peak. Mineral oil and polyol ester: 350 bar, 20 to 60 °C recommended. Water glycol: 210 bar, 10 to 50 °C. Fire-resistant fluids may need special seals and cooling, so talk to us first. Cleanliness ISO 4406 -/18/15 or better. Source: KPM catalogue K7VG (KPM2021, edition A, November 2020).

Options

Controls and options

Every option is in the model code, so the nameplate tells us exactly how a pump is built.

Torque limiter (1, 5, 7)

Horsepower limiting, alone or with pressure cut-off.

Pressure cut-off (4, 5)

Direct-acting cut-off, set at 300 bar as standard and adjustable from 100 to 350 bar.

Remote pressure (7)

Remote pressure cut-off, adjustable from 200 to 350 bar.

Flow control (N, P, E)

Negative, positive or electric flow control; electric control needs an amplifier and pilot pressure.

Load sensing (7L)

Load sense with torque limiting, at a 15 bar differential.

Manual control (0)

Stepless manual displacement control.

Through drives

SAE A to SAE D through drives, for an auxiliary pump.

Fluids and extras

Water glycol (W) and polyol ester (P) versions, a high-speed version, tilt indicator and resonators.

Applications

Where K7VG pumps work

Industrial machinery

High-pressure open circuit systems on general industrial machinery

Fire-resistant fluid systems

Polyol ester or water glycol versions, where the fluid must resist fire

Need a smaller pump? The K3VL runs from 28 to 200 cc/rev at 320 bar.

Downloads

Kawasaki K7VG downloads

KPM’s own documents. No forms, no sign-up.

K7VG catalogue

KPM · KPM2021, edition A, November 2020 · PDF

Download

Installation drawings

For your size and through drive, on request

Ask us

Sizing help

Not sure which size?

Send us the flow, pressure, drive speed, fluid and control you need, and we will size the K7VG for you.

Replacing a pump

Replacing an existing K7VG

Every K7VG carries its full model code on the nameplate. Send it to us and we will match the size, fluid, controls and through drive, or source genuine KPM spares.

What to send us

The full model code from the nameplate, and photos of the nameplate, shaft and regulator. The code covers the size, controls, mounting and shaft.

Genuine KPM spares

Send us the model code and we will source genuine KPM spare parts, or a replacement unit. Call us and we will talk it through.

Model code

How to read a K7VG model code

  1. Series and size: K7VG180 or K7VG265
  2. Fluid: blank for mineral oil, W for water glycol, P for polyol ester
  3. Circuit and through drive: 3 for open circuit, then N for none or A to D
  4. Bracket, rotation and type: the bracket and flange code, R, and H for the high-speed version
  5. Regulator and flow control: such as 5 with N, P, E or L
  6. Settings and extras: torque limiter range (H or M), pressure options, tilt indicator and resonators

Let’s find your pump

Looking for a Kawasaki K7VG pump or a price?

We just need three details.

Replacing one? Send us the model code from the nameplate and a photo, and we will work from those.

1

Flow

Displacement, or the flow you need at your drive speed.

2

Pressure

Working and peak pressure.

3

Control

Load sense, pressure cut-off, torque limit or electric.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Kawasaki K7VG questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

Can a K7VG run on fire-resistant fluid?

Yes, in the versions built for it. KPM rates it at 350 bar on mineral oil and polyol ester, and 210 bar on water glycol. Fire-resistant fluids may need special seals and cooling, so talk to us first.

Why is the K7VG265 270 cc/rev?

That is the displacement KPM gives for the K7VG265. The model name and the displacement simply differ.

Can it drive a second pump?

Yes. SAE A to SAE D through drives take an auxiliary pump, which can save a separate control or boost pump.

What is the H version?

A high-speed K7VG265, which self-primes to 1,600 rpm and runs to 1,900 rpm with a boosted inlet.

Do you supply K7VG spares?

Yes. Send us the model code from the nameplate and we will source genuine KPM spare parts or a replacement pump.