Skip to main content

Home › Products › Kawasaki pumps › K3VL

Kawasaki K3VL Axial Piston Pump

Open circuit variable displacement pump, 320 bar rated.

Seven sizes from 28 to 200 cc/rev, for marine, mobile and industrial machines. Supplied and supported in the UK from Silsden, West Yorkshire.

Get a priceSend us your model code
Kawasaki K3VL variable displacement axial piston pump

200cc/rev

Largest sizeK3VL200 and 200H; the K3VL28 is the smallest.

320bar

Rated pressure350 bar peak, on every size.

3,600rpm

Maximum speedK3VL28 with boosted inlet; 3,000 rpm self-priming.

90%

Peak efficiencyOverall efficiency above 90% at peak.

Overview

The Kawasaki K3VL: medium to high pressure, open circuit

The K3VL is a variable displacement swash plate pump for open circuits, built for marine, mobile and industrial machines that need medium to high pressure. It is rated at 320 bar continuous with 350 bar peaks, self-primes strongly, and runs quietly with low pulsation.

Seven sizes run from 28 to 200 cc/rev, including the K3VL200H with an integral impeller for high-speed running. Controls cover load sense, pressure cut-off, integral unloading and proportional relief, torque limiting and electric displacement control, on SAE or ISO mountings with through drives for a second pump.

We are a UK distributor for Kawasaki Precision Machinery, supplying Kawasaki pumps and motors and genuine KPM spares, with help choosing the right unit and support from Silsden.

Which Kawasaki pump?

Start with the circuit and the pressure

  • Open circuit, 320 bar, 28 to 200 cc: the K3VL
  • Compact load-sensing mobile pump, 280 bar: the K3VLS
  • Heavy industrial duty, 350 bar: the K7VG
  • Closed circuit drive: the K8V with an M7V motor
  • Replacing a pump? Send us the model code from the nameplate

Key advantages

Why choose the Kawasaki K3VL

320 bar continuous

Rated at 320 bar with 350 bar peaks across the range.

Efficient

Overall efficiency above 90% at peak, and a high power-to-weight ratio.

Strong self-priming

Self-priming to 3,000 rpm on the smallest size, faster with a boosted inlet.

Quiet

Low pulsation and low noise.

Responsive controls

Many control options, with integral unloading or proportional relief built in.

Built to last

Designed for long service life, with SAE and ISO mountings and shafts.

Technical data

Kawasaki K3VL technical specifications

Every size is rated at 320 bar continuous and 350 bar peak.

SizeDisplacement (cc/rev)Self-priming speed (rpm)Max. speed, boosted (rpm)Weight (kg)Case volume (L)
K3VL28283,0003,600200.6
K3VL45452,7003,250270.6
K3VL80802,4003,000350.8
K3VL1121122,2002,700651.5
K3VL1401402,2002,500651.5
K3VL2002001,9002,200953.0
K3VL200H2002,2002,2001303.2

Minimum speed 600 rpm. Case drain 1 bar continuous, 4 bar peak. −20 to +95 °C, designed for 60 °C maximum. Mineral oil anti-wear hydraulic fluid; 10 to 200 cSt normal, 10 to 1,000 cSt allowable; cleanliness ISO 4406 -/18/15 or better. Source: KPM UK K3VL datasheet (MYK6500, 2023).

Options

Controls and options

Every option is in the model code, so the nameplate tells us exactly how a pump is built.

Load sense (L0, L1)

Load sense with pressure cut-off, with or without the load-sense bleed.

Pressure cut-off (P0)

Pressure cut-off on its own, or with integral unloading or proportional relief.

Integral unloading (LM, LN, PM, PN)

Solenoid unloading, normally open or closed, at 12 or 24 V DC or 115 or 230 V AC.

Proportional relief (LV, PV)

Integral proportional pressure relief, with load sense or cut-off.

Electronic pressure (PR)

Inverse proportional electronic pressure control, 24 V DC.

Torque limiter (/1, /2, /3)

Torque limiting, with hydraulic or 24 V electric power shift.

Displacement control (E, Q)

Electric displacement control at 12 or 24 V, or pilot-operated control.

Through drives and seals

SAE A to E through drives for a second pump, Viton seals, and a water glycol version.

Applications

Where K3VL pumps work

Marine

Marine hydraulic systems needing medium to high pressure

Mobile machines

Mobile hydraulics with load sense or torque limiting

Industrial

Industrial hydraulic systems, with integral unloading or proportional relief

Building a compact load-sensing mobile circuit? The K3VLS is lighter, rated at 280 bar.

Downloads

Kawasaki K3VL downloads

KPM’s own documents. No forms, no sign-up.

K3VL datasheet

KPM UK · MYK6500, 2023 · PDF

Download

Installation drawings

For your size, mounting and through drive, on request

Ask us

Sizing help

Not sure which size?

Send us the flow, pressure, drive speed and control you need, and we will size the K3VL for you.

Replacing a pump

Replacing an existing K3VL

Every K3VL carries its full model code on the nameplate. Send it to us and we will match the size, controls, mounting and shaft, or source genuine KPM spares.

What to send us

The full model code from the nameplate, and photos of the nameplate, shaft and regulator. The code covers the size, controls, mounting and shaft.

Genuine KPM spares

Send us the model code and we will source genuine KPM spare parts, or a replacement unit. Call us and we will talk it through.

Model code

How to read a K3VL model code

  1. Series and size: K3VL28 to K3VL200H
  2. Design and fluid: design series B or C; blank for mineral oil, V for Viton, W for water glycol
  3. Through drive: 0 for none, A to E for SAE through drives, R or N for single pumps
  4. Rotation and mounting: R or L, then the flange and shaft code and M or S port threads
  5. Regulator: such as L0, P0, LN or PV, with any unloader voltage
  6. Additional control: such as /1 torque limiter, or E2 electric displacement control

Let’s find your pump

Looking for a Kawasaki K3VL pump or a price?

We just need three details.

Replacing one? Send us the model code from the nameplate and a photo, and we will work from those.

1

Flow

Displacement, or the flow you need at your drive speed.

2

Pressure

Working and peak pressure.

3

Control

Load sense, pressure cut-off, torque limit or electric.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Kawasaki K3VL questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

What pressure is the K3VL rated for?

320 bar continuous and 350 bar peak, on every size from the K3VL28 to the K3VL200H.

K3VL or K3VLS?

The K3VL is the medium to high pressure pump, rated 320 bar, from 28 to 200 cc/rev. The K3VLS is a compact medium-duty pump, rated 280 bar, from 50 to 150 cc/rev, built for load sensing on mobile machines.

Can a K3VL drive a second pump?

Yes. Through drives from SAE A to SAE E are available, depending on the size, so a second pump can be mounted on the back.

What is the K3VL200H?

A K3VL200 with an integral impeller for high-speed running. It self-primes to 2,200 rpm, against 1,900 rpm for the standard K3VL200.

Which fluids can it run on?

Mineral oil anti-wear hydraulic fluid as standard. Viton seals and a water glycol version, for pumps without a through drive, are in the model code; ask us about other fluids.