Home › Products › Eckart actuators › 2AxA and 3AxA
Eckart Multi-Axis Actuators
The 2AxA and 3AxA move and hold heavy loads in two or three axes.
Home › Products › Eckart actuators › 2AxA and 3AxA
The 2AxA and 3AxA move and hold heavy loads in two or three axes.
Up to 49,000 Nm on the 2AxA’s main axis, and three axes on the 3AxA. Supplied and supported in the UK from Silsden, West Yorkshire.

49,000Nm
Torque2AxA axis 2 at 210 bar; axis 1 gives 11,000 Nm.
65,000Nm
Holding torque2AxA axis 2 at 190 bar.
250bar
Operating pressure2AxA, with peaks to 285 bar.
3axes
On the 3AxAX, Y and Z, configured to the job.
Overview
The 2AxA and 3AxA build Eckart’s helical rotary actuators into one unit that moves and holds heavy loads in more than one axis. Both work hydraulically, and both are adapted to the job they do.
The 2AxA moves a load in two axes, in the X and Y planes or others. Its first axis gives up to 11,000 Nm and its second up to 49,000 Nm at 210 bar, with holding torques of 16,000 and 65,000 Nm. The 3AxA adds a third axis for movement in X, Y and Z, and is specified for each application.
We supply Eckart’s hydraulic range in the UK, with help choosing the right size and support from Silsden. Our photos show the actuators in red; they are supplied grey as standard, and special colours are available.
2AxA or 3AxA?
Key advantages
Moves heavy loads precisely and holds them in position, axis by axis.
Two or three axes of movement from a single hydraulic actuator.
Up to 65,000 Nm of holding torque on the 2AxA’s second axis.
Radial forces up to 66,000 N and bending moments up to 110,000 Nm on the 2AxA.
Peak pressure of 285 bar, secured by a pressure relief valve.
Configured for the application, for any installation position.
Technical data
Figures for each axis of the 2AxA. The 3AxA is specified for each application.
| 2AxA | Axis 1 | Axis 2 |
|---|---|---|
| Max. torque at 210 bar | 11,000 Nm | 49,000 Nm |
| Max. holding torque | 16,000 Nm at 210 bar | 65,000 Nm at 190 bar |
| Rotation | 180°, and any angle between | 365° (+2°), and any angle between |
| Absorption (cm³ per °) | 12.93 | 72.64 |
| Max. operating pressure | 250 bar | 250 bar |
| Max. peak pressure | 285 bar, relief valve | 285 bar, relief valve |
| Radial force | 18,500 N | 66,000 N |
| Axial force | 35,000 N | 60,000 N |
| Bending moment | 9,500 Nm | 110,000 Nm |
| Weight | 364 kg | 650 kg |
Minimum pressure 10 bar; −25 to +70 °C, wider on request; hydraulic fluids to DIN 51524 or ISO 11158, with HFC and HFD fluids on request; any installation position. Source: Eckart 2AxA product page.
Applications
Suction dredgers and special vessels for wind farms, platforms and harbours; shipbuilding
Positioning booms on drilling vehicles and scrapers
Heavy-duty and construction cranes, bridge construction
Moving heavy equipment on offshore drilling platforms
Industrial manipulators and robotics, heavy plant, warehouse automation
Energy and aerospace test rigs, simulation, stage and event technology
Sizing help
Send us the load, the torque and angle on each axis, and the environment, and we will take it from there.
Specifying
Each multi-axis actuator is matched to its job. Send us the details below and we will work through it with Eckart.
Send us the type plate details and photos of the actuator and its mounting, and we will match it.
Send us the type code and we will source genuine Eckart spare parts or arrange a repair. Call us and we will talk it through.
Checklist
Let’s find your actuator
We just need three details.
Replacing one? Send us the type code from the type plate and a photo, and we will work from those.
1
The torque needed, and at what pressure.
2
Rotation angle, plus stroke if it is rotary-linear.
3
Cycle time, environment, and any ATEX or SIL needs.
Prefer us to call you? Request a callback.
FAQs
Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.
The 2AxA moves and holds a load in two axes. The 3AxA adds a third, for movement in the X, Y and Z planes.
It is configured for each application, and Eckart notes that the unit shown is an example. Send us the loads and axes and we will work through the specification with Eckart.
Up to 16,000 Nm on axis 1 at 210 bar, and up to 65,000 Nm on axis 2 at 190 bar.
Up to 250 bar, with a minimum of 10 bar. Peaks to 285 bar are secured by a pressure relief valve.
Grey as standard. The photos on our site show them in red, and special colours are available on request.