Skip to main content

Home › Products › Eckart actuators › HyRAV Flex

Eckart HyRAV Flex Valve Actuator

Quarter-turn hydraulic valve actuators, 500 to 250,000 Nm.

Double acting or spring return, ATEX and SIL2 certified, with an EN ISO 5211 valve flange. Supplied and supported in the UK from Silsden, West Yorkshire.

Get a priceSend us your valve details
Eckart HyRAV Flex hydraulic quarter-turn valve actuators

15sizes

Actuator sizesAS000 to AS250.

250,000Nm

Maximum torqueAS250; the AS000 gives 500 Nm.

0.2s

Fail-safe stroke90° in as little as 0.2 seconds, by size.

SIL2

CertifiedAlso ATEX, with further approvals in progress.

Overview

Eckart HyRAV Flex: hydraulic power for quarter-turn valves

HyRAV Flex is Eckart’s range of hydraulic quarter-turn valve actuators. Combined helical gears turn hydraulic pressure into a 90° rotation, and the concentric design keeps radial forces off the valve. Solid seals mean no internal leakage, so the actuator holds any intermediate position.

Fifteen sizes run from 500 to 250,000 Nm, double acting or single acting with a spring return for fail-safe opening or closing. Each mounts to the valve through an EN ISO 5211 flange, on a hollow shaft with feather keys or a square drive, and the range is certified to ATEX and SIL2.

We supply Eckart’s hydraulic range in the UK, with help choosing the right size and support from Silsden. Our photos show the actuators in red; they are supplied grey as standard, and special colours are available.

Double or single acting?

Choose by what the valve must do on a fault

  • Opened and closed by pressure both ways: double acting, over 100,000 operations
  • Must open or close itself if power is lost: single acting, spring return
  • Fast trip: fail-safe operation from 0.2 seconds per 90°, by size
  • Not a valve? See the SM4 and the rest of the Eckart range

Key advantages

Why choose HyRAV Flex

Kind to the valve

A concentric design keeps radial forces off the valve, with low-friction seals and optimised cushioning.

Holds any position

Solid seals and no internal leakage, so the valve stays where it is set.

Fail-safe when it matters

Spring return versions trip from 0.2 seconds per 90°, depending on size.

Accurate

Positioning accuracy better than 0.5° of full scale, measured directly through the through shaft.

Low maintenance

Maintenance-free with no lubrication needed, and wear-resistant nitrided moving parts.

Built for harsh sites

IP65, from −25 to +70 °C, robust against vibration, ATEX and SIL2 certified.

Technical data

HyRAV Flex technical specifications

Standard torque by size; torques can be adapted to the valve. Each size mounts to the flange shown and to the neighbouring flange sizes.

TypeStandard torque (Nm)Flange (EN ISO 5211)Valve flangesHollow shaft bore, max. (mm)Square, max. (mm)
AS000500F10F07, F10, F122822
AS0011,000F12F10, F12, F143627
AS0022,000F14F12, F14, F164836
AS0044,000F16F14, F16, F256046
AS0066,000F25F16, F25, F307255
AS0088,000F25F16, F25, F307255
AS012On requestF30F25, F30, F358570
AS01616,000F30F25, F30, F359875
AS02424,000F35F30, F35, F40115100
AS03232,000F35F30, F35, F40130115
AS06363,000F40F35, F40, F48165130
AS100100,000F48F40, F48200165
AS125125,000F48F40, F48220180
AS185185,000F60F48, F60250200
AS250250,000F60F48, F60280220

Maximum pressure 210 bar; minimum 5 to 10 bar, and economical from 20 bar. Quarter turn, 90°. Operating time 0.5 to 200 seconds, or from 0.2 seconds fail-safe. Duty S1, 100%. IP65, −25 to +70 °C, mineral oil HLP to DIN 51524. Source: Eckart HyRAV Flex brochure, which also gives weights by size.

Options

Options and configurations

HyRAV Flex is configured around the valve, its duty and the site.

Control boxes

Mechanical, inductive or potentiometer position feedback.

Manual override

Manual operation of the valve when needed.

Valve blocks

Hydraulic valve blocks mounted to the actuator.

Power units

A hydraulic power unit (HPU) to suit, or individual solutions for the installation.

Applications

Where HyRAV Flex works

Power generation

Coal, gas, oil and nuclear plant; hydroelectric, geothermal, solar thermal and biogas

Oil and gas

Exploration and offshore, refineries, pipelines and tank farms

Water

Water treatment, sewage treatment and drinking water distribution

Shipbuilding

Ships and submarines

Process industries

Chemical and pharmaceutical, food, air conditioning

Steel

Steel mills and steel hydraulic structures

Downloads

HyRAV Flex downloads

Eckart’s own documents. No forms, no sign-up.

HyRAV Flex brochure

Eckart GmbH · sizes, torques, flanges and weights · PDF

Download

Eckart company brochure

Eckart GmbH · PDF

Download

Valve mounting drawing

For your valve and flange, on request

Ask us

Sizing help

Not sure which size?

Send us the valve type, size and torque, and whether it must fail safe, and we will size the actuator.

Specifying

Specifying a HyRAV Flex actuator

Most of the choice comes from the valve. Send us its details and the duty, and we will match the size, flange, drive and options.

Replacing an existing actuator?

Send us the type plate details and photos of the actuator and valve, and we will match it, whatever make it is.

Spares and repairs

Send us the type code and we will source genuine Eckart spare parts or arrange a repair. Call us and we will talk it through.

Checklist

What we need to size a HyRAV Flex

  1. Valve: type (butterfly, ball or other), size and flange
  2. Torque: the valve torque, with any safety factor you apply
  3. Fail-safe: double acting, or spring return to open or to close
  4. Timing: operating time, and any trip time
  5. Site: hydraulic supply pressure, temperature, ATEX zone or SIL level

Let’s find your actuator

Looking for a HyRAV Flex actuator or a price?

We just need three details.

Replacing one? Send us the type code from the type plate and a photo, and we will work from those.

1

Torque

The torque needed, and at what pressure.

2

Motion

Rotation angle, plus stroke if it is rotary-linear.

3

Duty

Cycle time, environment, and any ATEX or SIL needs.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

HyRAV Flex questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

Which valves can HyRAV Flex operate?

Quarter-turn valves, including butterfly and ball valves, mounted through an EN ISO 5211 flange with a hollow shaft and feather keys or a square drive.

Is HyRAV Flex fail-safe?

The single-acting versions are. A spring package returns the valve to open or closed when pressure is lost, in as little as 0.2 seconds per 90° depending on size. Double-acting versions are also available.

What certification does it have?

ATEX and SIL2, with further approvals in progress, and quality assurance to DIN EN ISO 9001.

What hydraulic pressure does it need?

Up to 210 bar, with a minimum of 5 to 10 bar; it is economical from 20 bar.

What colour are Eckart actuators?

Grey as standard. The photos on our site show them in red, and special colours are available on request.