Skip to main content

Home › Products › Eckart actuators › HSE4

Eckart HSE4 Rotary-Linear Actuator

Rotation and stroke from one compact unit, up to 100 bar.

A rotary actuator and a double-acting cylinder in one housing: up to 2,050 Nm and 1,200 mm of stroke. Supplied and supported in the UK from Silsden, West Yorkshire.

Get a priceSend us your type code
Eckart HSE4 hydraulic rotary-linear actuator

2,050Nm

TorqueSize 125 at 100 bar; size 40 gives 65 Nm.

122,000N

Push forceSize 125 at 100 bar; pull force up to 72,000 N.

1,200mm

StrokeLonger on request.

360°+

RotationAny angle, including beyond 360°.

Overview

The Eckart HSE4: rotation and stroke together

The HSE4 combines an Eckart rotary actuator with a double-acting linear cylinder, giving rotary and linear movement from one compact unit. Each motion is driven hydraulically on its own, so the sequence can be chosen freely, or both can run together when driven evenly.

Six sizes give 65 to 2,050 Nm of torque and up to 122,000 N of push force at 100 bar, with strokes up to 1,200 mm and 90°, 180°, 270° or 360° rotation as standard. It mounts by flange or foot, and both the rotary and the linear ends can be cushioned and fitted with position switches.

We supply Eckart’s hydraulic range in the UK, with help choosing the right size and support from Silsden. Our photos show the actuators in red; they are supplied grey as standard, and special colours are available.

Which Eckart actuator?

Start with the motion you need

  • Rotation under heavy load, up to 250 bar: the SM4
  • Low-pressure systems up to 100 bar: the E1
  • Mobile machines and work platforms: the E3
  • Rotation and stroke together: the HSE4
  • Opening and closing valves: HyRAV Flex
  • Movement in two or three axes: the 2AxA or 3AxA

Key advantages

Why choose the Eckart HSE4

Two motions, one unit

Rotary and linear movement with full flexibility in a small space.

Free sequence

Rotary and linear motion are driven separately, one after the other or together.

Holds any position

Solid seals with no internal leakage hold the load wherever it stops.

Soft end of travel

End cushioning on the rotary actuator and on the cylinder.

Adjustable

Adjustable drive shaft datum and an externally adjustable end stop of ±5°.

Built for peak loads

Nitrided, wear-resistant moving parts and a press-fit hub joint.

Technical data

Eckart HSE4 technical specifications

Size is the piston diameter. Torque and forces are the maximum at 100 bar; weights are at zero stroke, from 90° to 360° versions.

SizeMax. torque (Nm)Push force (N)Pull force (N)Absorption, rotary (cm³ per °)Weight at zero stroke (kg)
406512,5007,5000.1709.3 to 10.8
5013519,50010,0000.35213.9 to 16.5
6327031,00015,0000.66920.2 to 24.1
8048050,00026,0001.32336.9 to 44.4
1001,01578,00040,0002.62463.5 to 77.5
1252,050122,00072,0005.154114.3 to 145.8

Stroke up to 1,200 mm, longer on request; weight rises with stroke. Minimum pressure 5 to 10 bar; −25 to +70 °C, wider on request; hydraulic fluids to DIN 51524, with HFC and HFD fluids on request. Sources: Eckart HSE4 catalogue (production 10/2005) and product page.

Options

Options and configurations

Options are added to the type code; leave them out for the standard version.

End cushioning (Z1, Z1C)

For the rotary actuator, and for the cylinder at the rod end, the actuator end or both.

End stops (Z4)

A long-range adjustable end stop, over the full or part of the range.

Position sensing (Z5, Z6, Z6C)

A cam, an inductive switch assembly for the rotation, and end position switches for the stroke.

Foot mounting (FU)

A foot-mounted version alongside the flange mount.

Shafts (ZN, SZ)

A DIN 5480 gear hub profile, and a locating pin for cams and control equipment.

Longer stroke

Strokes beyond 1,200 mm, higher pressures and wider temperature ranges on request.

Applications

Where HSE4 actuators work

Machine building

Tool change

Bending machines

Rotary and linear movement on bending and forming machines

Valves

Gate valve control

Only need rotation? The E1 and SM4 are rotary actuators.

Downloads

Eckart HSE4 downloads

Eckart’s own documents. No forms, no sign-up.

HSE4 catalogue

Eckart GmbH · production 10/2005 · PDF

Download

Eckart company brochure

Eckart GmbH · PDF

Download

Sizing help

Not sure which size?

Send us the torque, force, stroke, rotation angle and load, and we will size the HSE4 for you.

Replacing an actuator

Replacing an existing HSE4

Every HSE4 carries its type code on the type plate. Send us the full code and we will match the size, angle, stroke and options.

What to send us

The type code from the type plate, a photo of the actuator and its mounting, and what it moves.

Spares and repairs

Send us the type code and we will source genuine Eckart spare parts or arrange a repair. Call us and we will talk it through.

Model code

What to read from an HSE4 type plate

  1. Model: HSE4
  2. Size: the piston diameter, 40 to 125
  3. Rotation: 90°, 180°, 270°, 360° or the angle specified
  4. Stroke: in millimetres
  5. Options: such as FU, SZ, Z1, Z1C, Z4, Z5, Z6, Z6C or ZN

Let’s find your actuator

Looking for an Eckart HSE4 or a price?

We just need three details.

Replacing one? Send us the type code from the type plate and a photo, and we will work from those.

1

Torque

The torque needed, and at what pressure.

2

Motion

Rotation angle, plus stroke if it is rotary-linear.

3

Duty

Cycle time, environment, and any ATEX or SIL needs.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Eckart HSE4 questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

Can the HSE4 rotate and stroke at the same time?

Yes. The rotary actuator and the cylinder are driven separately, so they can move one after the other in any order, or together when driven evenly.

How long can the stroke be?

Up to 1,200 mm as standard, and longer on request.

What pressure does the HSE4 run at?

Up to 100 bar, with higher pressures on request, and a minimum of 5 to 10 bar.

Can it hold a load in position?

Yes. Solid seals with no internal leakage hold the load at any position.

What colour are Eckart actuators?

Grey as standard. The photos on our site show them in red, and special colours are available on request.