Skip to main content

Home › Products › Eckart actuators › E1

Eckart E1 Rotary Actuator

Compact rotary actuator for low-pressure hydraulics, up to 100 bar.

Six sizes from 74 to 2,450 Nm, for systems running at 40 to 100 bar. Supplied and supported in the UK from Silsden, West Yorkshire.

Get a priceSend us your type code
Eckart E1 low-pressure hydraulic rotary actuator

6sizes

Actuator sizesPiston diameters from 40 to 125 mm.

2,450Nm

TorqueSize 125 at 100 bar; size 40 gives 74 Nm.

100bar

Operating pressureHigher on request; minimum 5 to 10 bar.

360°+

RotationAny angle, including beyond 360°.

Overview

The Eckart E1: rotary power for low-pressure systems

The E1 is Eckart’s rotary actuator for low-pressure hydraulics, made for systems running at 40 to 100 bar. Pressure moves a piston, and helical gears turn that stroke into rotation of the drive shaft, with the same torque in both directions.

Six sizes run from 74 to 2,450 Nm at 100 bar, with 90°, 180°, 270° or 360° rotation as standard and any angle between or beyond. The E1 mounts by front flange or foot, and Eckart offers a wide range of shafts and options, so most units are built to suit the machine.

We supply Eckart’s hydraulic range in the UK, with help choosing the right size and support from Silsden. Our photos show the actuators in red; they are supplied grey as standard, and special colours are available.

Which Eckart actuator?

Start with the motion you need

  • Rotation under heavy load, up to 250 bar: the SM4
  • Low-pressure systems up to 100 bar: the E1
  • Mobile machines and work platforms: the E3
  • Rotation and stroke together: the HSE4
  • Opening and closing valves: HyRAV Flex
  • Movement in two or three axes: the 2AxA or 3AxA

Key advantages

Why choose the Eckart E1

Made for low pressure

Full torque at 100 bar or less, with a minimum of 5 to 10 bar.

Small installation space

Ultra-compact and robust, with the smallest installation dimensions.

Soft end of travel

Effective end cushioning absorbs kinetic energy at the end of rotation.

Adjustable

Adjustable drive shaft datum, and an end stop that can be set externally.

Equal torque both ways

Torque is the same in both directions of rotation.

Built to suit

Flange or foot mounting, and a choice of solid, hollow and gear shafts.

Technical data

Eckart E1 technical specifications

Size is the piston diameter. Torque is the maximum at 100 bar; weights run from 90° to 360° versions.

SizeMax. torque (Nm)Specific torque (Nm/bar)Absorption (cm³ per °)Time per 90° (s)Weight (kg)Radial load (kN)
40740.740.170.134.0 to 5.80.589
501621.620.380.186.5 to 9.51.864
633043.040.700.2410.0 to 15.43.434
805885.881.430.2613.7 to 21.87.358
1001,27512.752.980.4323.8 to 39.48.829
1252,45024.505.860.5539.0 to 66.011.772

Time per 90° is the maximum, unloaded. Minimum pressure 5 to 10 bar; −25 to +70 °C, wider on request; hydraulic fluids to DIN 51524, with HFC and HFD fluids on request. Axial load limits are in the catalogue. Sources: Eckart E1 catalogue (production 10/2007) and product page.

Options

Options and configurations

Options are added to the type code; leave them out for the standard version.

End cushioning (Z1)

Eckart end cushioning for a soft end of travel.

End stops (Z2, Z4)

An externally adjustable end stop of ±5°, or a long-range adjustable end stop.

Position sensing (Z5, Z6)

A cam on the locating pin, and an inductive switch assembly for angle feedback.

Shafts (HW, ZW, ZN)

Hollow shaft, DIN 5480 gear shaft, or a DIN 5480 gear hub in a hollow shaft.

Mounting (FL)

Flange design, or foot mounting, with or without threads.

Locating pin (SZ)

A pin on the shaft end for cams and control equipment.

Special angles

Any intermediate rotation angle, including beyond 360°.

Higher pressure

Pressures above 100 bar and wider temperature ranges on request.

Applications

Where E1 actuators work

Machine building

Tool change and workpiece positioning

Bending machines

Rotary movement on bending and forming machines

Valves

Gate valve control on low-pressure systems

Need more torque or pressure? The SM4 runs at up to 250 bar.

Downloads

Eckart E1 downloads

Eckart’s own documents. No forms, no sign-up.

E1 catalogue

Eckart GmbH · production 10/2007 · PDF

Download

E1 size hazard analysis

Eckart GmbH · PDF

Download

Eckart company brochure

Eckart GmbH · PDF

Download

Sizing help

Not sure which size?

Send us the torque, pressure, rotation angle and load, and we will size the E1 for you.

Replacing an actuator

Replacing an existing E1

Every E1 carries its type code on the type plate. Send us the full code and we will match the size, angle and options.

What to send us

The type code from the type plate, a photo of the actuator and its mounting, and what it moves.

Spares and repairs

Send us the type code and we will source genuine Eckart spare parts or arrange a repair. Call us and we will talk it through.

Model code

How to read an E1 type code

  1. Model: E1
  2. Size: the piston diameter, 40 to 125
  3. Rotation: 90°, 180°, 270°, 360° or the angle specified
  4. Options: such as FL, HW, SZ, Z1, Z2, Z4, Z5, Z6, ZW or ZN

Let’s find your actuator

Looking for an Eckart E1 or a price?

We just need three details.

Replacing one? Send us the type code from the type plate and a photo, and we will work from those.

1

Torque

The torque needed, and at what pressure.

2

Motion

Rotation angle, plus stroke if it is rotary-linear.

3

Duty

Cycle time, environment, and any ATEX or SIL needs.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Eckart E1 questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

What pressure does the E1 run at?

Up to 100 bar, with higher pressures on request. It needs a minimum of 5 to 10 bar, and is designed for systems running at 40 to 100 bar.

E1 or SM4?

The E1 is built for low-pressure systems up to 100 bar. For more torque, or pressures up to 250 bar, the SM4 is the heavy-duty choice.

What rotation angles are available?

90°, 180°, 270° and 360° as standard, and any angle in between or beyond 360° to order.

How is the E1 mounted?

By front flange or foot, with or without threads, and with a choice of solid, hollow and gear shafts.

What colour are Eckart actuators?

Grey as standard. The photos on our site show them in red, and special colours are available on request.