Home › Products › Eckart actuators › SM4
Eckart SM4 Rotary Actuator
Heavy-duty helical rotary actuator, up to 250 bar.
Home › Products › Eckart actuators › SM4
Heavy-duty helical rotary actuator, up to 250 bar.
Thirteen sizes from 180 to 85,000 Nm, with any rotation angle, including beyond 360°. Supplied and supported in the UK from Silsden, West Yorkshire.

13sizes
Catalogue sizesPiston diameters from 40 to 300 mm.
85,000Nm
TorqueSize 300 at 250 bar; size 40 gives 180 Nm.
250bar
Operating pressureHigher on request; minimum 5 to 10 bar.
360°+
RotationAny angle, including beyond 360°.
Overview
The SM4 is Eckart’s heavy-duty hydraulic rotary actuator. Pressure moves a piston between two end stops, and opposed helical gears turn that stroke into rotation of the drive shaft, doubling the angle for a given stroke. Solid seals mean no internal leakage, so the actuator holds a load at any position.
Thirteen catalogue sizes run from 180 to 85,000 Nm at 250 bar, with 90°, 180°, 270° or 360° rotation as standard and any angle between or beyond. A four-point bearing carries radial and axial loads, and Eckart end cushioning absorbs the energy at the end of travel.
We supply Eckart’s hydraulic range in the UK, with help choosing the right size and support from Silsden. Our photos show the actuators in red; they are supplied grey as standard, and special colours are available.
Which Eckart actuator?
Key advantages
Solid seals with no internal leakage hold the load wherever the shaft stops.
High torque from a small installation space, economical from about 20 bar.
A four-point bearing carries radial and axial loads, with low hydraulic axial load on the shaft.
Eckart end cushioning absorbs kinetic energy and limits pressure peaks.
Adjustable drive shaft datum and an externally adjustable end stop of ±5° as standard.
Nitrided, wear-resistant moving parts and seals with anti-extrusion back-up rings.
Technical data
Size is the piston diameter. Torque is the maximum at 250 bar; weights run from 90° to 360° versions.
| Size | Max. torque (Nm) | Specific torque (Nm/bar) | Absorption (cm³ per °) | Time per 90° (s) | Weight (kg) | Radial load (kN) |
|---|---|---|---|---|---|---|
| 40 | 180 | 0.72 | 0.170 | 0.13 | 5.5 to 7.0 | 1.45 |
| 50 | 375 | 1.50 | 0.352 | 0.18 | 8.8 to 11.1 | 3.10 |
| 63 | 735 | 2.94 | 0.669 | 0.24 | 11.5 to 15.5 | 4.80 |
| 80 | 1,300 | 5.2 | 1.323 | 0.26 | 21.0 to 27.5 | 9.80 |
| 100 | 2,700 | 10.8 | 2.624 | 0.43 | 37 to 52 | 17.00 |
| 125 | 5,400 | 21.6 | 5.154 | 0.55 | 65 to 96 | 25.60 |
| 140 | 8,400 | 33.6 | 7.819 | 0.63 | 92 to 134 | 32.00 |
| 160 | 12,800 | 51.2 | 11.846 | 0.73 | 143 to 208 | 41.60 |
| 180 | 19,600 | 78.4 | 17.342 | 1.00 | 197 to 302 | 53.00 |
| 200 | 26,000 | 104.2 | 24.014 | 1.24 | 245 to 368 | 62.30 |
| 225 | 34,300 | 137.2 | 32.162 | 1.50 | 342 to 498 | 65.10 |
| 250 | 48,000 | 192.0 | 44.767 | 1.78 | 540 to 797 | 68.50 |
| 300 | 85,000 | 340.0 | 79.028 | 2.10 | 976 to 1,456 | 87.20 |
Time per 90° is the maximum, unloaded. Minimum pressure 5 to 10 bar; −25 to +70 °C, wider on request; mineral oil HLP, with HFC and HFD fluids on request. Sources: Eckart SM4 catalogue (production 02/2009) and product page. The product page quotes up to 250,000 Nm for the SM4; the catalogue sizes above run to 85,000 Nm, so ask us about larger sizes.
Applications
Tool change, bending machines, workpiece positioning and changing
Gate valve control
Boom rotation, tipping devices
Opening and closing, rotational devices, transport
Running on 100 bar or less? The E1 is built for low-pressure hydraulics.
Sizing help
Send us the torque, pressure, rotation angle and load, and we will size the SM4 for you.
Replacing an actuator
Every SM4 carries its type code on the type plate. Send us the full code and we will match the size, angle and options.
The type code from the type plate, a photo of the actuator and its mounting, and what it moves.
Send us the type code and we will source genuine Eckart spare parts or arrange a repair. Call us and we will talk it through.
Model code
Let’s find your actuator
We just need three details.
Replacing one? Send us the type code from the type plate and a photo, and we will work from those.
1
The torque needed, and at what pressure.
2
Rotation angle, plus stroke if it is rotary-linear.
3
Cycle time, environment, and any ATEX or SIL needs.
Prefer us to call you? Request a callback.
FAQs
Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.
Hydraulic pressure moves a piston between two end stops, and opposed helical gears turn that stroke into rotation of the drive shaft. Torque is the same in both directions.
Yes. Solid seals prevent internal leakage, so the actuator holds a load at any intermediate position.
90°, 180°, 270° and 360° as standard, and any angle in between or beyond 360° to order.
Yes, ATEX certification is one of the SM4 special designs, along with salt water resistance and pressures above 250 bar.
Grey as standard. The photos on our site show them in red, and special colours are available on request.