Skip to main content

Home › Products › Staffa motors › HPC400

Staffa HPC400 Four-Speed Motor

Four speeds, 25,000 Nm and 430 kW.

The largest motor in the Staffa high power range, from 6,555 cc/rev. Genuine Kawasaki Staffa motors and spares, supplied and supported from Silsden, West Yorkshire.

Get a priceSend us your model code
Staffa HPC400 four-speed radial piston hydraulic motor

430kW

Continuous powerMaximum, with crankcase flushing.

25,000Nm

Rated torqueFrom 6,555 cc/rev at 250 bar.

4speeds

Operating speedsTwo banks, each high or low.

594kg

WeightApproximately, for every HPC400 model.

Overview

The Staffa HPC400: four speeds and 430 kW from one motor

The Staffa HPC400 is the largest motor in the Staffa high power range. Two piston banks, each switched between a high and a low displacement, give four operating speeds, with 25,000 Nm rated torque and up to 430 kW of continuous power.

Built on the HPC range, it changes displacement under load, and each bank switches through its own CETOP 3 valve, so the banks move independently. A freewheel option limits the maximum to 6,391 cc/rev and lets one bank freewheel without reducing rated pressure when motoring.

We are a UK distributor for Kawasaki Precision Machinery, supplying HPC400 motors and genuine KPM spares, and we make the Staffa brakes designed for Staffa motors.

Which Staffa motor?

Choose the HPC400 for the biggest single-motor duties

Key advantages

Why choose a Staffa HPC400

Four speeds

Two banks, each high or low, for four operating speeds from one motor.

430 kW and 25,000 Nm

Maximum continuous power of 430 kW and 25,000 Nm rated torque.

Changes under load

Dynamic displacement change, with each bank on its own CETOP 3 valve.

Freewheel option

For freewheeling winch duties such as emergency load drop and cable payout.

High starting torque

Smooth low-speed running and high starting efficiency, from the rugged Staffa design.

Built for hard places

Marine paint and cylinder heads, improved shaft seal life and improved cavitation resistance.

Technical data

Staffa HPC400 technical specifications

The HPC400 has front and rear piston banks, each switched between a high and a low displacement. Settings are named in cubic inches; these are examples from the datasheet, and many other combinations are available.

SettingTotal displacement (cc/rev)Front + rear banks (cc/rev)Running torque (Nm/bar)Continuous speed (rpm)Continuous power (kW)
400Both banks high6,5553,277 + 3,277100.0220430
390Freewheel version maximum6,3913,195 + 3,19597.4220430
2704,4253,277 + 1,14766.1220315
195Rear bank at zero3,1953,195 + 047.6250250
140Both banks low2,2941,147 + 1,14734.1460245
801,3111,147 + 16419.6460105
20328164 + 1643.663020
00Freewheel00 + 001,5000

Continuous pressure is 250 bar and intermittent 300 bar on the working settings, and 20 bar on the 10 and 00 settings; static pressure is 405 bar to DNV rules. Full power needs 15 l/min of crankcase flushing. Source: KPM UK HPC400 datasheet, Cat. No. M-2004/03.26.

Options

Options and configurations

Every option is set in the model code, so a replacement motor can be matched exactly.

Shafts

S5 23-tooth spline to BS 3550, Z5 spline to DIN 5480 W100x4x24x7h, or P2 100 mm parallel key.

Valve housings

SFM45 with 2″ SAE code 62 four-bolt flanges, preferred, or SC45 with 38 mm ports for a six-bolt manifold.

Displacement control

The C spacer carries two CETOP 3 interfaces, one for each bank’s displacement change valve.

Mounting

Ten 22 mm holes on a 419.1 mm PCD and a 380.95 mm spigot; radial bending moment up to 16,000 Nm.

Seals

A high pressure shaft seal, rated 10 bar continuous case pressure, and a stainless steel sleeve for longer seal life.

Paint and cylinder heads

Marine primer, marine-style cylinder heads, and marine or two-pack epoxy grey paint.

Cavitation resistance

For overrunning loads and short losses of port pressure.

Fluids and filtration

Mineral oil as standard; other fluids after a check with KPM UK. Filtration to ISO 4406 -/18/14 or cleaner.

Applications

Where HPC400 motors work

Marine and offshore

Deck and anchor winches, with a freewheel for emergency load drop and cable payout

Recycling and waste

Shredders and waste treatment plant

Quarrying and mining

Crushers and conveyors

Plastics and die casting

Injection moulding screw drives, die casting machines

Tunnelling

Tunnel boring machines

Need more than about 25 kNm? A Combination Drive adds a planetary gearbox to a Staffa motor and brake.

Downloads

Staffa HPC400 downloads

Current documents from Kawasaki Precision Machinery (UK). No forms, no sign-up.

Staffa HPC400 datasheet

Cat. No. M-2004/03.26 · PDF

Download

Spares drawing

016709 · HPC400 · PDF

View

3D CAD models

S5 and P2 shafts with the SFM45 housing

View

Installation drawing

On request

Ask us

Can’t find it?

Need the drawing for your exact motor?

Send us the model code from the nameplate and we will find the right drawing, CAD model or spares list.

Replacing a motor

Replacing an existing HPC400

Every HPC400 carries its model code on the nameplate. Send us the full code and we will match the shaft, all four displacements, the housing and the options.

Four displacement codes

An HPC400 model code carries four displacement codes, high and low for each bank, such as 200/05/200/05. Send us the whole code so we match all four.

What to send us

The full model code, a photo of the nameplate, photos of the shaft and port face, and what the motor drives.

Spares and repairs

We supply genuine KPM spares for the HPC400; KPM spares drawing 016709 lists them. Need a repair rather than a replacement? Call us and we will talk it through.

Model code

How to read an HPC400 model code

  1. Series: HPC400
  2. Shaft: S5, Z5 or P2
  3. Displacements: four codes, high and low for each bank, such as 200/05/200/05
  4. Valve housing: SFM45 or SC45
  5. C spacer: C, with two CETOP 3 interfaces
  6. Design series: the current series number
  7. Special features: a P code for seals, paint, installation and performance options

Let’s find your motor

Looking for an HPC400 motor or a price?

We just need three details.

Replacing one? Send us the model code from the nameplate and a photo, and we will work from those.

1

Torque

Continuous and peak, at the motor shaft.

2

Speed

Shaft rpm, and the range if it varies.

3

Duty

Hours per day, starts per hour and direction changes.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Staffa HPC400 questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

How does the HPC400 give four speeds?

It has two piston banks, front and rear. Each switches between a high and a low displacement through its own CETOP 3 valve, giving four combinations.

What power and torque does it give?

Up to 430 kW continuous, with crankcase flushing, and 25,000 Nm rated torque from 6,555 cc/rev at 250 bar.

Can the HPC400 freewheel?

Yes, with the freewheel option, which limits maximum displacement to 6,391 cc/rev. One bank can be set to freewheel without reducing rated pressure when motoring.

How heavy is it?

About 594 kg, for every HPC400 model.

Which fluids can it run on?

Mineral oil as standard. Other fluids, including fire-resistant ones, may need lower pressure and speed limits, so check with us first.