Home › Products › Staffa motors › HPB
Staffa HPB Radial Piston Motor
Fixed displacement. More speed and power.
Home › Products › Staffa motors › HPB
Fixed displacement. More speed and power.
From 983 to 5,310 cc/rev and up to 23,000 Nm. Genuine Kawasaki Staffa motors and spares, supplied and supported from Silsden, West Yorkshire.

5,310cc/rev
Largest displacementHPB325; the HPB060 starts at 983 cc/rev.
23,000Nm
Output torqueUp to, across the range.
278kW
Shaft powerHPB270 and HPB325 with crankcase flushing.
250bar
Continuous pressure300 bar intermittent.
Overview
The Staffa HPB is Kawasaki’s high power fixed displacement radial piston motor. It keeps the rugged, proven Staffa design and adds higher speed and power ratings, for duties that ask more of a single displacement.
Eight frames run from HPB060 to HPB325, covering 983 to 5,310 cc/rev, with output torque up to 23,000 Nm and up to 215 kW continuous, or 278 kW with crankcase flushing. Heavy duty HPHDB versions with stronger shafts are offered on the 125 to 325 frames.
We are a UK distributor for Kawasaki Precision Machinery, supplying HPB motors and genuine KPM spares, and we make the Staffa brakes designed for Staffa motors.
Which Staffa motor?
Key advantages
Up to 215 kW continuous, and up to 278 kW with crankcase flushing.
Output torque up to 23,000 Nm, with an increased starting torque option for slow, frequent starts.
Long wear life, with high volumetric and mechanical efficiency.
Airborne noise below 66.7 dB(A) across the continuous operating range.
A wide range of shafts, ports and mounting interfaces, with heavy duty shafts on the larger frames.
Marine paint and cylinder heads, improved shaft seal life, thermal shock resistance. ATEX enquiries are subject to confirmation of the current motor specification and documentation by Kawasaki Precision Machinery.
Technical data
Ideal torque is the theoretical torque per bar; multiply it by the working pressure and the running efficiency for output torque. Where two figures are shown, the first is with the FM3 valve housing and the second with FM4.
| Frame code | Displacement (cc/rev) | Ideal torque (Nm/bar) | Running efficiency (%) | Continuous speed (rpm) | Continuous power (kW) | With flushing (kW) |
|---|---|---|---|---|---|---|
| HPB060 | 983 | 15.6 | 93.0 | 450 / 490 | 115 | 131 |
| HPB080 | 1,344 | 21.4 | 94.4 | 340 / 430 | 130 | 147 |
| HPB100 | 1,600 | 25.5 | 94.5 | 270 / 365 | 140 | 165 |
| HPB125Also HPHDB125 | 2,050 | 32.6 | 94.5 | 215 / 300 | 135 / 150 | 173 / 202 |
| HPB150Also HPHDB150 | 2,470 | 39.3 | 95.4 | 200 / 250 | 156 / 185 | 195 / 234 |
| HPB200Also HPHDB200 | 3,087 | 49.1 | 96.3 | 175 / 230 | 174 / 210 | 216 / 261 |
| HPB270Also HPHDB270 | 4,310 | 68.6 | 95.8 | 150 | 215 | 278 |
| HPB325Also HPHDB325 | 5,310 | 84.5 | 96.3 | 130 | 215 | 278 |
Continuous pressure is 250 bar. Intermittent pressure, 300 bar, is allowed up to 50 rpm for 15% of the duty in periods of up to 5 minutes, and above 50 rpm for 2% of the duty in periods of up to 30 seconds; static pressure is 405 bar to DNV rules. Source: KPM UK HPB datasheet (file M-200601.18-HPB), which also gives starting efficiency, torque curves and fluid limits.
Applications
Deck and mooring winches, deck cranes, ROV launch systems, pipe handling
Shredders and waste treatment plant
Crushers and conveyors
Injection moulding screw drives, die casting machines
Can’t find it?
Send us the model code from the nameplate and we will find the right drawing, CAD model or spares list.
Replacing a motor
Every HPB carries its model code on the nameplate. Send us the full code and we will match the frame, shaft, ports and options, or tell you what has replaced them.
The HPB covers the same frame sizes as the HMB from 060 to 325, with higher speed and power ratings. Send us both model codes and the duty, and we will check the fit.
The full model code, a photo of the nameplate, photos of the shaft and port face, and what the motor drives.
We supply genuine KPM spares for HPB motors. Quote the model code, or the part number from the spares drawing. Need a repair rather than a replacement? Call us and we will talk it through.
Model code
Let’s find your motor
We just need three details.
Replacing one? Send us the model code from the nameplate and a photo, and we will work from those.
1
Continuous and peak, at the motor shaft.
2
Shaft rpm, and the range if it varies.
3
Hours per day, starts per hour and direction changes.
Prefer us to call you? Request a callback.
FAQs
Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.
Both are fixed displacement Staffa motors. The HPB is rated for higher speed and power: up to 215 kW continuous, or 278 kW with crankcase flushing, across eight frames from 983 to 5,310 cc/rev.
The heavy duty HPB, with stronger P2, S5 and Z5 shafts for higher radial loads, on the 125, 150, 200, 270 and 325 frames.
Only for the higher power ratings; the datasheet gives continuous power with and without it. In cold conditions, KPM recommends at least 5 l/min of flushing while the motor is idle.
Yes, with both ports connected and the circuit boosted, but it needs large recirculating flows and cooling. KPM prefers the HMC, HPC or HMF for freewheeling duties.
Mineral oil as standard. Phosphate ester (HFD) runs with the F3 prefix at the full 250 bar continuous. Water-based fluids (HFA, HFB and HFC) run with the F11 prefix at 103 to 138 bar continuous depending on type, and HFA and HFC at half the mineral oil speed limits.