Skip to main content

Home › Products › Staffa motors › HMB

Staffa HMB Radial Piston Motor

Fixed displacement. High torque at low speed.

From 188 to 8,000 cc/rev and up to 25,250 Nm. Genuine Kawasaki Staffa motors and spares, supplied and supported from Silsden, West Yorkshire.

Get a priceSend us your model code
Staffa HMB radial piston hydraulic motor

8,000cc/rev

DisplacementFrom 188 cc/rev on the smallest frame.

25,250Nm

Output torqueHMHDB400 at 250 bar continuous.

250bar

Continuous pressureUp to 300 bar intermittent.

190kW

Continuous powerFrom the HMHDB400 frame.

Overview

The Staffa HMB motor: one displacement, high torque, low speed

The Staffa HMB motor is Kawasaki’s fixed displacement radial piston motor. It gives high torque from a standstill and smooth running at low speed, and for many slow, heavy duties one displacement is all the machine needs.

Frame sizes run from HMB030 to HMB500, covering 188 to 8,000 cc/rev and running torques from 2.30 to 114 Nm/bar. Heavy duty HMHDB versions are available on the larger frames, and a wide choice of shafts, ports and mountings, including mountings to suit most existing interfaces, makes an HMB straightforward to fit.

We are a UK distributor for Kawasaki Precision Machinery, supplying HMB motors and genuine KPM spares, and we make the Staffa brakes that fit them.

Which Staffa motor?

Choose the HMB when one speed range is enough

  • Change speed on the run: the dual displacement HMC or the three-speed HMF
  • More speed and power from one displacement: the HPB
  • A duty where the motor must freewheel: the HMC, HPC or HMF
  • Above about 25 kNm: a Combination Drive

Key advantages

Why choose a Staffa HMB

High torque from a standstill

Good breakout torque and smooth running, with an increased starting torque option for duties below about 10 rpm or with frequent starts and reversals.

Hydrostatic balancing

Hydrostatic balancing reduces wear and extends service life.

High efficiency

High volumetric and mechanical efficiency across the range.

Fits the machine you have

A wide range of shafts, ports and mounting interfaces, with mountings to suit most existing interfaces on request.

Runs on fire-resistant fluids

Phosphate ester (HFD) and water-based fluids (HFA, HFB and HFC), as well as mineral oil.

Built for hard places

Marine paint and cylinder heads, improved shaft seal life, thermal shock resistance. ATEX enquiries are subject to confirmation of the current motor specification and documentation by Kawasaki Precision Machinery.

Technical data

Staffa HMB technical specifications

Running torque is the average actual running torque per bar. Use the pressure difference across the motor for a preliminary torque estimate, then check the manufacturer’s performance curves for the operating speed, fluid and return pressure. Frame codes are written as they appear on the nameplate.

Frame codeDisplacement (cc/rev)Running torque (Nm/bar)Continuous pressure (bar)Intermittent pressure (bar)Continuous speed (rpm)Continuous power (kW)
HMB030Replaces HMB0101882.3020725050018
HMB0304426.5620725045042
HMB030FM3 housing4927.3120725045052
HMB04574010.9525030040060
HMB06098314.525030030080
HMB0801,34419.9250300300100
HMB1001,63924.3250293250110
HMB125, HMHDB1252,05030.66250300220100
HMB150, HMHDB1502,47036.95250300220115
HMB150FM3 housing2,47036.95250300168115
HMB200, HMHDB2003,08746.07250300175130
HMB200FM3 housing3,08746.07250300135130
HMB270, HMHDB2704,31063.79250300125140
HMB325, HMHDB3255,31079.4250300100140
HMHDB4006,800101250300120190
HMB5008,000114190227100170

Continuous duty means working within every maximum for speed, pressure and power at the same time. For intermittent maximum pressure, the limit is 15% duty for periods of up to 5 minutes at speeds up to 50 rpm. Above 50 rpm, the limit is 2% duty for periods of up to 30 seconds. The pressure limit for the selected frame still applies. Source: KPM UK datasheet M200112.24-HMB, revised December 2024, which also gives volumetric data, stress limits and bearing life.

Options

Options and configurations

Every option is set in the model code, so a replacement motor can be matched exactly. See our Staffa motor model-code guide for a field-by-field explanation.

Shafts

A choice of shaft ends on every frame, coded P, Q, S, T or Z, with numbered variants on the larger frames; the installation drawings show each one. Shafts point horizontally or down as standard, or up with the V option.

Ports and valve housings

SAE flange ports in the SFM housings: 1¼” Code 61 (SFM3), 1½” Code 62 (SFM4) and 2″ Code 62 (SFM45) on the HMHDB400 and HMB500. Or ports for a bolt-on manifold in the SM3 and SM4 housings.

Speed sensing

Tj: a dual-channel Hall effect sensor giving speed and direction, 16 pulses per revolution, sealed to IP68 and powered from 8 to 32 V. Ts adds an FU210 module with a tacho, a relay and a 4 to 20 mA output.

Seals, paint and mountings

A high pressure shaft seal for crankcase pressures above 3.5 bar, a stainless steel shaft sleeve for corrosive conditions, marine primer paint and cylinder heads, and 21 or 22 mm mounting holes on the larger frames.

Performance options

Improved cavitation resistance for overrunning loads, standard on the monobloc HMB030 and HMB045. Increased starting torque, anti-clockwise rotation set by the valve, and thermal shock resistance for cold starts.

Fluids

Mineral oil as standard. Phosphate ester (HFD) with the F3 prefix, and water-based fluids (HFA, HFB and HFC) with the F11 prefix.

ATEX

For potentially explosive atmospheres, send us the required zone, gas or dust classification, temperature limits and operating duty. We will ask Kawasaki Precision Machinery to confirm the current ATEX specification, documentation and permitted options for the selected motor before supply.

Brakes and gearing

Staffa failsafe multi-plate brakes mount directly to the motor: F032 and F102 up to HMB100, F202 and F402 from HMB125 to HMHDB400, with 2,750 to 32,540 Nm static torque. For more torque, a Combination Drive adds a planetary gearbox.

Applications

Where HMB motors work

Marine and offshore

Deck and mooring winches, deck cranes, ROV launch systems, pipe handling

Recycling and waste

Shredders and waste treatment plant

Quarrying and mining

Crushers and conveyors

Plastics and die casting

Injection moulding screw drives, die casting machines

Tunnelling

Tunnel boring machines

Does the motor need to freewheel? KPM recommends the HMC, HPC or HMF instead.

Downloads

Staffa HMB downloads

Current documents from Kawasaki Precision Machinery (UK). No forms, no sign-up.

Staffa HMB datasheet

M200112.24-HMB · revised December 2024 · PDF

Download

Staffa ATEX reference — confirm current documentation

M-10.18 · HMB, HPB, HMC, HPC and HMF · PDF

Download

Installation drawings

By frame, HMB030 to HMB500 · PDF and CAD

View

Spares drawings

016472 HMB030 · 016502 HMB030 and HMB045 two-part · 016451 HMB060 to HMB200 · 016396 HMB270 and HMB325 · 016506 HMHDB400

View

3D CAD models

By model code, for every frame

View

Can’t find it?

Need the drawing for your exact motor?

Send us the model code from the nameplate and we will find the right drawing, CAD model or spares list.

Replacing a motor

Replacing an existing HMB motor

Every HMB carries its model code on the nameplate. Send us the full code and we will match the frame, shaft, ports and options, or tell you what has replaced them.

Two changes worth knowing

The HMB010 is replaced by the 188 cc/rev HMB030. KPM’s December 2024 datasheet replaces the F3, FM3, F4 and FM4 valve housings with SM and SFM housings; if your motor has one of the older housings, send us the code and we will confirm the match.

What to send us

The full model code, a photo of the nameplate, photos of the shaft and port face, and what the motor drives.

Spares and repairs

We supply genuine KPM spares for HMB motors. Quote the model code, or the part number from the spares drawing for your frame. Need a repair rather than a replacement? Call us and we will talk it through.

Model code

How to read an HMB model code

  1. Fluid: blank for mineral oil, F3 for phosphate ester, F11 for water-based fluids
  2. Model: HMB, or HMHDB for heavy duty
  3. Frame size: 030 to 500
  4. Shaft type: such as S3 or P1
  5. Shaft orientation: blank, or V for vertically up
  6. Main ports: such as SFM3
  7. Speed sensor: blank, Tj or Ts
  8. Design series: the current series number
  9. Special features: a P code for catalogued options, or PL for features KPM numbers individually

Let’s find your motor

Looking for an HMB motor or a price?

We just need three details.

Replacing an HMB? Send us the model code from the nameplate and a photo, and we will work from those.

1

Torque

Continuous and peak, at the motor shaft.

2

Speed

Shaft rpm, and the range if it varies.

3

Duty

Hours per day, starts per hour and direction changes.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Staffa HMB questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

What is the difference between HMB and HMHDB?

HMHDB is the heavy duty version. It is offered on the 125, 150, 200, 270 and 325 frames, with its own shaft options (P2, S5 and Z5), and the 400 frame comes in heavy duty form only.

What replaced the HMB010?

The HMB030 at 188 cc/rev, rated 207 bar continuous and 500 rpm. Send us the code from your HMB010 nameplate and we will confirm the match.

Can an HMB motor freewheel?

Yes, with both ports connected and the circuit boosted, but it needs large recirculating flows and careful attention to cooling. KPM recommends the HMC, HPC or HMF for freewheeling duties.

Which fluids can an HMB run on?

Mineral oil as standard. Phosphate ester (HFD) with the F3 prefix, and water-based fluids (HFA, HFB and HFC) with the F11 prefix.

Is there an ATEX version of the HMB?

ATEX enquiries are subject to manufacturer confirmation. Send us the application requirements and we will ask Kawasaki Precision Machinery to confirm the current specification, documentation, permitted options and installation requirements for the selected HMB motor.