Legacy range
The Staffa G range: support for units in service
The Staffa G range is six single-reduction epicyclic gearboxes, from the G008 to the G110, designed around Staffa motors. In their original data they give up to 150 kNm continuous torque, and many are still working on winches, mobile machines and industrial drives. We support them with servicing and repairs.
For a new drive, or to replace a worn-out geared motor, we recommend a Combination Drive: a Staffa motor and a Staffa brake with a modern planetary gearbox, in one package and with a much wider choice of ratios and torques.
Send us the gearbox and motor codes from the nameplates, and we will tell you whether it can be serviced, repaired or replaced.
Which route?
Existing gearbox or new drive?
- A G-range gearbox already in service: servicing and repairs from us
- A new drive, or a geared motor beyond repair: a Combination Drive
- A brake to hold the load: Staffa brakes fit Staffa motors directly
- Not sure? Send us the nameplate details
What we can do
Keeping Staffa geared motors running
Servicing and repairs
Servicing and repairs for G-range gearboxes, from the G008 to the G110, and the Staffa motors and brakes fitted to them.
Spares
Send us the nameplate details and we will check which spares are available.
A modern replacement
Where a unit is worn out, a Combination Drive replaces the motor, brake and gearbox as one package.
Legacy range
The G range at a glance
Six gearboxes, each built around a group of Staffa motors. Torques are for the strongest geared unit on each gearbox; the tables below give every unit.
| Gearbox | Ratio | Staffa motors | Geared units | Max. continuous torque (kNm) | Max. peak torque (kNm) | Brake module |
|---|---|---|---|---|---|---|
| G008 | Ask us | B010, B030, B045; C010, C030 | 5 | Ask us | Ask us | F025 |
| G020 | 6.64:1 | B045 to B100; C080 | 5 | 27.1 | 36.6 | F090 |
| G030 | 7.38:1 | B060 to B270; C080 to C270 | 10 | 40.7 | 55.6 | M030 |
| G050 | 7.38:1 | B125 to B400; C200 to C325 | 9 | 68.0 | 92.2 | M050 |
| G080 | 7:1 | B200 to B400; C200 to C325 | 7 | 108 | 136 | M080 |
| G110 | 7:1 | B200 to B400; C200 to C325 | 7 | 150 | 211.3 | M110 |
Torques are from the original Staffa brochures (Technical Bulletins T107, T112 and T113, December 1980, and T114, April 1981; G020 Range brochure, undated). Motors, unit counts and brake modules follow the later G-range designations. Later literature quotes lower continuous ratings for the gearboxes, so check a unit in service with us before relying on these figures.
Reference data
Geared unit data by gearbox
For identifying units in service. Open a gearbox to see each geared unit by its code in the original Staffa brochure and the later code, which combines the gearbox and motor (GB3200 is a G030 with a B200).
G008: the smallest gearbox
For B010, B030 and B045 motors and C010 and C030 dual displacement motors: later codes GB0810, GB0830, GB0845, GC0810 and GC0830. Performance data on request; send us the nameplate codes.
G020: 6.64:1, up to 27.1 kNm continuous
| Staffa code | Later code | Motor | Max. continuous torque (kNm) | Max. peak torque (kNm) | Max. speed (rpm) | Approx. dry weight (kg) |
|---|---|---|---|---|---|---|
| GB0700 | GB2100 | B100 | 27.1 | 36.6 | 37 | 450 / 490 |
| GB0590 | GB2080 | B080 | 27.1 | 36.6 | 45 | 440 / 480 |
| GB0440 | GB2060 | B060 | 19.8 | 28.1 | 45 | 440 / 480 |
| GB0310 | GB2045 | B045 | 14.8 | 21.0 | 60 | 416 / 456 |
| GC0590 | GC2080 | C080 | 27.1 | 36.6 | 39 / 90 | 464 / 504 |
Weights are standard / braked. Source: Staffa G020 Range brochure (undated).
G030: 7.38:1, up to 40.7 kNm continuous
| Staffa code | Later code | Motor | Max. continuous torque (kNm) | Max. peak torque (kNm) | Max. speed (rpm) | Approx. dry weight (kg) |
|---|---|---|---|---|---|---|
| GB1300 | GB3200 | B200 | 40.7 | 55.6 | 24 | 730 / 776 |
| GB1050 | GB3150 | B150 | 40.7 | 55.6 | 30 | 730 / 776 |
| GB0900 | GB3125 | B125 | 40.7 | 55.6 | 30 | 660 / 706 |
| GB0750 | GB3100 | B100 | 37.4 | 52.9 | 34 | 590 / 636 |
| GB0600 | GB3080 | B080 | 30.6 | 43.3 | 40 | 580 / 626 |
| GB0450 | GB3060 | B060 | 22.0 | 31.2 | 40 | 580 / 626 |
| GC1300 | GC3200 | C200 | 40.7 | 55.6 | 17 / 53 | 740 / 786 |
| GC0600 | GC3080 | C080 | 33.0 | 44.0 | 35 / 81 | 600 / 646 |
Weights are standard / braked. Later literature also lists GB3270 (B270) and GC3270 (C270); ask us for their data. Source: Staffa G030 Range, Technical Bulletin T107, Issue 3, December 1980.
G050: 7.38:1, up to 68.0 kNm continuous
| Staffa code | Later code | Motor | Max. continuous torque (kNm) | Max. peak torque (kNm) | Max. speed (rpm) | Approx. dry weight (kg) |
|---|---|---|---|---|---|---|
| GB2940 | GB5400 | B400 | 68.0 | 92.2 | 13.5 | 1,343 |
| GB2340 | GB5325 | B325 | 68.0 | 92.2 | 13.5 | 1,296 |
| GB1940 | GB5270 | B270 | 68.0 | 92.2 | 17 | 1,287 |
| GB1310 | GB5200 | B200 | 68.0 | 92.2 | 24 | 1,150 |
| GB1060 | GB5150 | B150 | 56.8 | 80.5 | 30 | 1,150 |
| GB0910 | GB5125 | B125 | 45.3 | 64.2 | 30 | 1,084 |
| GC1940 | GC5270 | C270 | 68.0 | 92.2 | 16 / 47 | 1,317 |
| GC1310 | GC5200 | C200 | 68.0 | 92.2 | 17 / 53 | 1,149 |
Weights are for the standard unit. Later literature also lists GC5325 (C325); ask us for its data. Source: Staffa G050 Range, Technical Bulletin T112, Issue 2, December 1980.
G080: 7:1, up to 108 kNm continuous
| Staffa code | Later code | Motor | Max. continuous torque (kNm) | Max. peak torque (kNm) | Max. speed (rpm) | Approx. dry weight (kg) |
|---|---|---|---|---|---|---|
| GB2950 | GB8400 | B400 | 108 | 136 | 14 | 1,511 |
| GB2350 | GB8325 | B325 | 108 | 136 | 14 | 1,464 |
| GB1950 | GB8270 | B270 | 94.4 | 133.7 | 18 | 1,455 |
| GB1350 | GB8200 | B200 | 67.2 | 95.2 | 25 | 1,318 |
| GC1950 | GC8270 | C270 | 100.3 | 133.8 | 17 / 50 | 1,485 |
| GC1350 | GC8200 | C200 | 66.6 | 88.8 | 18 / 56 | 1,317 |
Weights are for the standard unit. Later literature also lists GC8325 (C325); ask us for its data. Source: Staffa G080 Range, Technical Bulletin T113, Issue 2, December 1980.
G110: 7:1, up to 150 kNm continuous
| Staffa code | Later code | Motor | Max. continuous torque (kNm) | Max. peak torque (kNm) | Max. speed (rpm) | Approx. dry weight (kg) |
|---|---|---|---|---|---|---|
| GB3000 | GB11400 | B400 | 150 | 211.3 | 14 | 1,620 |
| GB2400 | GB11325 | B325 | 116 | 164.7 | 14 | 1,573 |
| GB2000 | GB11270 | B270 | 94.4 | 133.7 | 18 | 1,564 |
| GB1390 | GB11200 | B200 | 67.2 | 95.2 | 25 | 1,427 |
| GC2000 | GC11270 | C270 | 100.3 | 133.8 | 17 / 50 | 1,594 |
| GC1390 | GC11200 | C200 | 66.6 | 88.8 | 18 / 56 | 1,426 |
Weights are for the standard unit. Later literature also lists GC11325 (C325); ask us for its data. Source: Staffa G110 Range, Technical Bulletin T114, Issue 4, April 1981.
GB units have a fixed displacement B motor; GC units have a dual displacement C motor, so they have two maximum speeds. A D after the G marks a braked unit (GDB, GDC). Figures are the kNm columns as printed in the original brochures; for a unit in service, ask us.
Quick answer
Got a gearbox in front of you?
Send us the codes from the gearbox and motor nameplates, and a photo, and we will tell you what it needs.
Servicing a gearbox
Servicing or replacing a Staffa gearbox
The nameplate codes tell us the gearbox, motor and brake. Send them with a photo and a note of what the drive is doing.
Service and repair
We service and repair Staffa geared motors and check which spares are available. Call us and we will talk it through.
Replacing a unit
Where a geared motor is beyond economic repair, a Combination Drive gives a modern replacement with a Staffa motor and brake.
Checklist
What we need from the nameplates
- Geared unit: GB or GC and its number: an original code such as GB1300, or a later one such as GB3200
- Motor: the Staffa motor code, such as B200 or C270; the two code systems overlap, so we need both
- Brake: whether one is fitted (a D after the G, as in GDB or GDC, marks a braked unit)
- Duty: what the drive does, and any symptoms
Let’s keep it running
Servicing a Staffa gearbox?
We just need three details.
Planning a new drive? Ask us about a Combination Drive instead.
1
Nameplates
The gearbox and motor codes.
2
Photo
Of the unit and its nameplates.
3
The job
What the drive does, and what it is doing now.
Prefer us to call you? Request a callback.
FAQs
Staffa gearbox questions
Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.
Which Staffa gearboxes do you support?
The G range: the G008, G020, G030, G050, G080 and G110, and the Staffa motors and brakes fitted to them. Send us the nameplate codes to start.
What torque do the G-range gearboxes give?
In the original Staffa data, up to 150 kNm continuous on a G110 with a B400 motor, with peaks up to 211 kNm; the G020 units start at 14.8 kNm. Later literature quotes lower continuous ratings, so check a unit in service with us.
What should I use for a new geared drive?
A Combination Drive: a Staffa motor and a Staffa brake with a modern planetary gearbox, in one package, with a much wider choice of ratios and torques than the G range.
How do I identify my gearbox?
From the nameplate codes. GB units carry a fixed displacement motor and GC units a dual displacement one, and a D (GDB, GDC) marks a braked unit. Older units carry the original Staffa number, such as GB1300; later ones combine the gearbox and motor, such as GB3200. Send us the motor code too, and the tables above will match it.
Can I get the original data sheets?
Yes, on request, for the G020, G030, G050, G080 and G110. They are archive documents from the original Staffa range, so check current details with us.