We are the original equipment manufacturer of Staffa brakes and the only source of them. Four sizes, spring applied and hydraulically released, made to mount directly to a Staffa motor.

4sizes
Brake sizesF032, F102, F202 and F402.
32,540Nm
Static brake torqueF402; the F032 starts at 2,750 Nm.
70bar
Continuous pressureMaximum; full release from 28 to 40 bar, by size.
−40°C
Low temperature limitEvery size works from −40 to +80 °C.
Overview
Staffa brakes: failsafe holding for Staffa motors
Staffa brakes are spring applied, hydraulically released multi-plate brakes, made to mount directly to Staffa radial piston motors. The springs hold the brake on whenever pressure is removed, so the load stays put when the machine stops or loses pressure.
The oil-immersed, free-mounting design replaces the older F100 and F200 shoe brakes. It is more compact, has fewer moving parts and is easier to maintain. Output shafts can be splined or parallel keyed, and the brake can be built into a planetary gearbox.
We make every Staffa brake, and we service and repair them and supply original spares. We also make brakes into a Combination Drive with a planetary gearbox, and we are a UK distributor for Kawasaki Precision Machinery, so the motor and brake can come from one place.
Which brake?
Start with the motor it fits
- F032: HMB030, HMB045; HMC030, HMC045
- F102: HMB060, HMB080, HMB100; HMC080
- F202: HMB125, HMB150, HMB200; HMC125, HMC200
- F402: HMB270, HMB325, HMB400, HMB500; HMC270, HMC325, HMC400
- Send us the full motor model code, shaft, mounting and required holding torque so we can confirm the brake.
Key advantages
Why choose a Staffa brake
Failsafe by design
Spring applied and hydraulically released, so the brake holds whenever pressure is removed.
Direct fit to Staffa motors
Each size has a direct interface with Staffa motor frames.
Compact multi-plate design
Oil-immersed plates in a more compact unit than the old shoe brakes.
Easier to maintain
Fewer moving parts, with servicing and original spares available from us.
Works from −40 to +80 °C
The same temperature range on every size.
Made by the OEM
Built, serviced and repaired by us, with original spares from the same team.
Technical data
Staffa brake technical specifications
Static brake torque is the holding torque with the brake applied. Release pressure is the minimum needed to release the brake fully.
| Brake | Static brake torque (Nm) | Full release pressure, min. (bar) | Continuous pressure, max. (bar) | Oil for full release (cc) | Temperature range (°C) | Fits Staffa frames |
|---|---|---|---|---|---|---|
| F032 | 2,750 | 31 | 70 | 65 | −40 to +80 | HMB030, HMB045; HMC030, HMC045 |
| F102 | 6,200 | 40 | 70 | 117 | −40 to +80 | HMB060, HMB080, HMB100; HMC080 |
| F202 | 13,830 | 28 | 70 | 230 | −40 to +80 | HMB125, HMB150, HMB200; HMC125, HMC200 |
| F402 | 32,540 | 28 | 70 | 260 | −40 to +80 | HMB270, HMB325, HMB400, HMB500; HMC270, HMC325, HMC400 |
Source: Staffa multi-plate brakes data sheet AC-DS-STB-01 (October 2026), from our technical brochure R1 (August 2023) and KPM flyer MYK6464 (November 2023). Motor compatibility follows the model-by-model listings in AC-DS-STB-01 and MYK6464; HMB400 denotes the HMHDB400 frame. Confirm the full motor model code, shaft, mounting and required holding torque against the installation drawing.
Applications
Where Staffa brakes work
Marine and offshore
Deck and mooring winches, deck cranes, launch and recovery systems
Bulk handling and ports
Ship loaders, rotating chutes, hatch covers
Quarrying and mining
Conveyors and crushers
Tunnelling
Tunnel boring machines
Need more torque than one motor and brake give? A Combination Drive adds a planetary gearbox.
Downloads
Staffa brake downloads
Our own brake documents, plus the Staffa motors the brakes fit. No forms, no sign-up.
Staffa multi-plate brake units brochure
Staffa Motor Compatibility
Installation drawings
Can’t find it?
Need a drawing for your brake?
Send us the brake model or the motor model code and we will send the installation drawing or spares list.
Replacing a brake
Replacing or servicing a Staffa brake
Send us the brake model, or the code from the motor nameplate, and we will match the brake or tell you what has replaced it.
Older F100 and F200 brakes
The F032 to F402 multi-plate range replaces the older F100 and F200 shoe brakes. We can still supply the F100 and F200 for existing machines, or help you move to the multi-plate design.
Service and repair
We service and repair Staffa brakes and supply original spares. Call us and we will talk it through.
What to send us
The brake model if you know it, the motor model code, photos of the brake and shaft, and what the drive does.
Checklist
What we need to match a brake
- Brake model: F032, F102, F202 or F402, or F100 or F200 on older machines
- Motor model code: from the motor nameplate, such as HMB100 or HMC200
- Output shaft: splined or parallel keyed
- Mounting: on the motor, or built into a gearbox
- Duty: what the brake holds, and how often it is applied
Let’s find your brake
Looking for a Staffa brake or a price?
We just need three details.
Replacing a brake? Send us the brake model or the motor model code, and a photo, and we will work from those.
1
Motor
The Staffa motor model code from its nameplate.
2
Torque
The holding torque the brake must give.
3
Shaft
Splined or keyed, or built into a gearbox.
Prefer us to call you? Request a callback.
FAQs
Staffa brake questions
Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.
Are Staffa brakes still made?
Yes. We are the original equipment manufacturer of Staffa brakes and the only source of them. We make the F032, F102, F202 and F402 multi-plate brakes, and can still supply the older F100 and F200.
Which Staffa brake fits my motor?
Each brake size has its own listed motor compatibility, as shown in the technical table above. Send us the full motor model code, shaft, mounting and required holding torque so we can confirm the combination against the installation drawing.
How does a Staffa brake work?
Springs apply the brake and hydraulic pressure releases it. Full release needs between 28 and 40 bar, depending on size, and the brake takes up to 70 bar continuous. Remove the pressure and the brake holds.
Can you still supply F100 and F200 brakes?
Yes, for existing machines. The F032 to F402 multi-plate range replaces them, and we can help you move across.
Can a Staffa brake be built into a gearbox?
Yes. The brake units can be integrated into planetary gearboxes, as in our Combination Drive, and into legacy Staffa G-range gearboxes.
