Skip to main content

Home › Products › Kawasaki pumps

Kawasaki Axial Piston Pumps

Open and closed circuit pumps, from 28 to 270 cc/rev.

Genuine Kawasaki pumps and motors, and genuine KPM spares, supplied and supported from Silsden, West Yorkshire.

Get a priceSend us your model code

Kawasaki range

Choose a Kawasaki pump or motor

Four pump series and the M7V motor. Each card links to the full page for that series.

Kawasaki K3VL axial piston pump

Open circuit

Kawasaki K3VL

Medium to high pressure, for marine, mobile and industrial machines.

Displacement28 to 200 cc/rev

  • 320 bar rated, 350 bar peak
  • Load sense, pressure cut-off, torque limiter and electric displacement controls
  • SAE and ISO mountings, with through-drive options
Kawasaki K3VLS axial piston pump

Open circuit, mobile

Kawasaki K3VLS

Compact medium-duty pump for load sensing and electric control.

Displacement50 to 150 cc/rev

  • 280 bar rated, 350 bar peak
  • Load sense, torque limiter, power shift and electric displacement controls
  • For mobile machines and industrial vehicles
Kawasaki K7VG high pressure axial piston pump

Open circuit, industrial

Kawasaki K7VG

High-pressure pump for general industrial machinery.

Displacement180 and 270 cc/rev

  • 350 bar rated, 400 bar peak
  • ISO mount and shaft, with optional SAE through drives
  • Mineral oil, polyol ester, or water glycol at 210 bar
Kawasaki K8V closed circuit axial piston pump

Closed circuit

Kawasaki K8V

Closed loop pump for hydrostatic transmissions.

Displacement71 to 130 cc/rev

  • 420 bar rated, 500 bar peak
  • Electric proportional, hydraulic pilot or manual control
  • Charge pump and relief valves as standard options
Kawasaki M7V variable displacement axial piston motor

Axial piston motor

Kawasaki M7V

High-speed variable displacement motor, for open or closed circuits.

Max. displacement88.5 to 215 cc/rev

  • 420 bar nominal, 500 bar maximum
  • Two-position, proportional and pressure-related displacement controls
  • Fixed displacement M7X version available
Kawasaki K3VG high-flow axial piston pump

Also from KPM

More series and genuine spares

Other Kawasaki pumps and motors, and genuine KPM spares for the units you already run.

  • K3VG industrial pumps: service, repair and refurbishment
  • K3V, K5V and K7V pumps for excavators and mobile machines
  • M3X, M3B and M5X swash plate motors
  • Genuine KPM spares, matched by model code

270cc/rev

Largest pump displacementK7VG265; the K3VL starts at 28 cc/rev.

420bar

Rated pressureK8V pumps and M7V motors.

4series

Pump seriesK3VL, K3VLS, K7VG and K8V.

6,150rpm

Motor speedM7V85 at reduced displacement.

The range

Kawasaki pumps: axial piston pumps for open and closed circuits

Kawasaki axial piston pumps are variable displacement swash plate pumps. The K3VL, K3VLS and K7VG run in open circuits, from compact load-sensing mobile pumps to high-pressure industrial units, and the K8V runs in closed circuits for hydrostatic transmissions.

The M7V motor completes a Kawasaki hydrostatic drive: a high-speed variable displacement swash plate motor for open and closed circuits. Every pump and motor carries its model code on the nameplate, and that code is all we need to match a replacement or a spare.

We are a UK distributor for Kawasaki Precision Machinery, supplying Kawasaki pumps and motors and genuine KPM spares, alongside the Staffa motors we supply and the Staffa brakes we make.

Which pump?

Start with the circuit and the pressure

  • Open circuit, 320 bar, 28 to 200 cc: the K3VL
  • Compact load-sensing mobile pump, 280 bar: the K3VLS
  • Heavy industrial duty, 350 bar: the K7VG
  • Closed circuit hydrostatic transmission: the K8V, with an M7V motor
  • Replacing a pump? Send us the model code from the nameplate

Compare the range

Kawasaki pumps and motors compared

Headline figures from each KPM datasheet. Displacement is per size, from smallest to largest.

SeriesTypeCircuitDisplacement (cc/rev)Rated pressure (bar)Peak pressure (bar)Source
K3VLVariable pumpOpen28 to 200320350KPM UK datasheet MYK6500, 2023
K3VLSVariable pumpOpen50 to 150280350KPM UK datasheet PDC019, February 2022
K7VGVariable pumpOpen180 and 270350400KPM catalogue KPM2021, November 2020
K8VVariable pumpClosed71 to 130420500Kawasaki product page
M7VVariable motorOpen or closed88.5 to 215420 nominal500KPM M7V and M7X catalogue

Sources as listed, opened 14 October 2026. Pressures given in MPa are converted at 1 MPa = 10 bar. The K7VG265 displaces 270 cc/rev and the K8V125 130 cc/rev.

Applications

Where Kawasaki pumps work

Construction

Wheel loaders, dozers, backhoe and track loaders, cranes

Agriculture and forestry

Tractors, combine harvesters, sprayers, forestry machines

Materials handling

Forklift trucks, telehandlers, access platforms

Quarrying and road building

Crushers, asphalt pavers and compactors

Drilling and lifting

Drill rigs and crane winches, with the M7V motor

Marine and industrial

Marine and industrial hydraulic systems, from the K3VL to the K7VG

Let’s find your pump

Looking for a Kawasaki pump or a price?

We just need three details.

Replacing a pump? Send us the model code from the nameplate and a photo, and we will work from those.

1

Flow

Displacement, or the flow you need at your drive speed.

2

Pressure

Working and peak pressure.

3

Control

Load sense, pressure cut-off, torque limit or electric.

Email us your detailsCall +44 (0)1535 655151

Prefer us to call you? Request a callback.

FAQs

Kawasaki pump questions

Anything else? Call +44 (0)1535 655151 or email sales@advanced-components.com.

Which Kawasaki pumps can you supply?

This page covers the K3VL, K3VLS and K7VG open circuit pumps, the K8V closed circuit pump and the M7V motor. We also service, repair and refurbish K3VG pumps; ask us about other KPM series and genuine KPM spares.

What is the difference between the K3VL and the K3VLS?

The K3VL is a medium to high pressure pump, rated 320 bar, from 28 to 200 cc/rev, for marine, mobile and industrial use. The K3VLS is a compact medium-duty pump, rated 280 bar, from 50 to 150 cc/rev, built for load sensing and electric displacement control on mobile machines.

Can a K7VG run on fire-resistant fluid?

Yes, with the right seals and materials. KPM rates it at 350 bar on mineral oil and polyol ester, and 210 bar on water glycol, and asks to be consulted on fire-resistant fluids.

Do you supply genuine KPM spares?

Yes. Send us the model code from the pump or motor nameplate and we will match the spares, or the replacement unit.

What is the M7V motor used for?

Hydrostatic transmissions, drill rigs and crane winches. It is a high-speed variable displacement motor for open or closed circuits, and a fixed displacement M7X version is available.